Versatile applications of laser focus probes in precision measurement technology. - In: 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI 2014), ISBN 978-1-63266-731-1, (2014), S. 29-34
Filterung von Messdaten in der Form- und Oberflächenmesstechnik. - VI, 143 S. Ilmenau : Techn. Univ., Habil.-Schr., 2014
Lorentz force velocimetry using electromagnetic force compensated load cells. - In: 22nd IMEKO TC3 International Conference on Measurement of Force, Mass and Torque 2014, ISBN 978-1-63266-728-1, (2014), S. 44-47
This paper discusses the flow rate measurement of poorly conducting fluids (such as electrolytes) using Lorentz force velocimetry (short: LFV). The Lorentz force caused by the moving electrolytes is in the range of micronewton. This tiny Lorentz force is determined using a high resolution force measurement systems based on electromagnetic force compensated (short: EMC) load cells. In this paper the force measurement system, the principle of LFV and the environmental influences on this kind of force measurement system are described.
Precise tiltmeter and inclinometer based on commercial force compensation weigh cells. - In: 22nd IMEKO TC3 International Conference on Measurement of Force, Mass and Torque 2014, ISBN 978-1-63266-728-1, (2014), S. 48-51
High precision measurements and monitoring of tilt or inclination are essential in the field of ultraprecise force and mass measurements. We present a new concept for high resolving tilt/ inclination measurements. Therefore a commercial electromagnetic force compensation (EMC) weigh cell is mounted in a hanging position and loaded with a defined weight. Thus the system conforms to a pendulum. By measuring the tilt depended deflection of the pendulum with the position sensor of the weigh cell we achieved a standard deviation of 7.1 nrad (3.4 nrad filtered) within a sampling time of 15 min. In future investigations we will compensate the deflection and take the compensation force as a measure for the tilt.
Direct Lorentz force compensation flowmeter for electrolytes. - In: Applied physics letters, ISSN 1077-3118, Bd. 105 (2014), 22, S. 223510, insges. 4 S.
http://dx.doi.org/10.1063/1.4903235
Entwicklung von Normalen für die Charakterisierung von Asphären-Messgeräten. - In: DGaO-Proceedings, ISSN 1614-8436, Bd. 115.2014, A31, insges. 2 S.
Zur Charakterisierung optischer und taktiler Asphären-Messgeräte sind Oberflächen notwendig, deren Formen weitestgehend bekannt sind. Dazu werden zum einen Normale mit typischen asphärischen Oberflächenanteilen verwendet. Zur Charakterisierung wichtiger Eigenschaften der Messgeräte werden Normale mit zusätzlichen Formanteilen benötigt.
http://www.db-thueringen.de/servlets/DocumentServlet?id=25316
Reduction of thermal effects on precise dimensional measurements. - In: Shaping the future by engineering, (2014), insges. 8 S.
http://nbn-resolving.de/urn:nbn:de:gbv:ilm1-2014iwk-168:3
Hyper- and multispectral imaging systems - a survey of different approaches at the Ilmenau University of Technology. - In: Shaping the future by engineering, (2014), insges. 11 S.
http://nbn-resolving.de/urn:nbn:de:gbv:ilm1-2014iwk-087:3
Interferometrical determination of concentric run-out errors in rotary tables for optical roundness measurement. - In: Shaping the future by engineering, (2014), insges. 11 S.
http://nbn-resolving.de/urn:nbn:de:gbv:ilm1-2014iwk-058:8
High-precision analog interfaces for low-latency PC-in-the-loop controller. - In: Shaping the future by engineering, (2014), insges. 7 S.
http://nbn-resolving.de/urn:nbn:de:gbv:ilm1-2014iwk-094:2