Design and performance of the new Sartorius 1kg-prototype mass comparator for high precision mass determination and research applications. - In: Transverse disciplines in metrology, ISBN 978-1-8482-1048-6, (2009), S. 657-667
Mass dissemination using a robot system. - In: Technisches Messen, ISSN 2196-7113, Bd. 76 (2009), 7/8, S. 382-387
http://dx.doi.org/10.1524/teme.2009.0976
Optical system for the simultaneous measurement of two-dimensional straightness errors and the roll angle. - In: Optical sensors 2009, ISBN 978-0-8194-7630-2, 2009, 73560S, insges. 8 S.
Advanced three-dimensional scan methods in the nanopositioning and nanomeasuring machine. - In: Measurement science and technology, ISSN 1361-6501, Bd. 20 (2009), 8, S. 084004, insges. 8 S.
The nanopositioning and nanomeasuring machine developed at the Ilmenau University of Technology was originally designed for surface measurements within a measuring volume of 25 mm × 25 mm × 5 mm. The interferometric length measuring and drive systems make it possible to move the stage with a resolution of 0.1 nm and a positioning uncertainty of less than 10 nm in all three axes. Various measuring tasks are possible depending on the installed probe system. Most of the sensors utilized are one-dimensional surface probes; however, some tasks require measuring sidewalls and other three-dimensional features. A new control system, based on the I++ DME specification, was implemented in the device. The I++ DME scan functions were improved and special scan functions added to allow advanced three-dimensional scan methods, further fulfilling the demands of scanning force microscopy and micro-coordinate measurements. This work gives an overview of these new functions and the application of them for several different measurements.
http://dx.doi.org/10.1088/0957-0233/20/8/084004
Navigation in a large measurement volume by using AFM technology as a sensor system in the NPMM. - In: Technisches Messen, ISSN 2196-7113, Bd. 76 (2009), 5, S. 274-277
http://dx.doi.org/10.1524/teme.2009.0968
The application of the dual-beam laser interferometer for calibration precision machine tools. - In: Technisches Messen, ISSN 2196-7113, Bd. 76 (2009), 5, S. 245-247
http://dx.doi.org/10.1524/teme.2009.0963
Uncertainty consideration of the coordinate system in nanopositioning- and nanomeasuring machines. - In: Technisches Messen, ISSN 2196-7113, Bd. 76 (2009), 5, S. 235-238
http://dx.doi.org/10.1524/teme.2009.0961
The metrological basis and operation of nanopositioning and nanomeasuring machine NMM-1. - In: Technisches Messen, ISSN 2196-7113, Bd. 76 (2009), 5, S. 227-234
http://dx.doi.org/10.1524/teme.2009.0960
Uncertainty budget for the temperature realisation with a triple-fixed-point blackbody. - In: Accreditation and quality assurance, ISSN 1432-0517, Bd. 14 (2009), 6, S. 313-317
A new triple-fixed-point blackbody for the calibration of radiation thermometers at fixed-point temperatures in the range of 232-660 &ayn;C was developed at the Ilmenau University of Technology. The fixed-point temperatures Tfp were measured by means of a transfer radiation thermometer and an uncertainty budget for Tfp was established, whose components differ from typical uncertainty budgets of single-fixed-point blackbodies.
http://dx.doi.org/10.1007/s00769-009-0527-6
Nanotopographic characterization of spotted micro arrays on polyvinyl alcohol films by high-resolution long-range nanoprofiling. - In: Scanning, ISSN 1932-8745, Bd. 31 (2009), 1, S. 35-48
http://dx.doi.org/10.1002/sca.20136