Düngen, Matthias;
Hardge, Markus; Koch, Michael;
Key figures for describing and comparing the energy consumption of injection molding processes. - In: 71st annual technical conference of the Society of Plastics Engineers 2013, (2014), S. 538-543
Key figures for describing and comparing the energy consumption of injection molding processes. - In: 71st annual technical conference of the Society of Plastics Engineers 2013, (2014), S. 538-543
This paper deals with energy consumption data for a broad variety of injection molded parts. An analysis shows that key figures can be derived for comparison and reference purposes and allow the evaluation of the energy efficiency in a part dependent production process. The key figures comprise material properties and part geometries to build a focus relative to these particular part characteristics independent of category or application. This approach goes beyond the widely applied method of examining a machine specific energy consumption data. A significant potential of energy reduction for most analyzed injection molding processes is expected.
Weigel, Christoph; Schneider, Mike; Hoffmann, Martin; Kahl, Sebastian; Jurisch, Reinhard
Low-energy-sensor for oxygen detection in packaging via RFID :
Niedrig-Energie-Sensor für den Sauerstoffnachweis in Verpackungen mittels RFID. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Low-energy-sensor for oxygen detection in packaging via RFID :
Niedrig-Energie-Sensor für den Sauerstoffnachweis in Verpackungen mittels RFID. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Müller, Lutz; Günschmann, Sabine; Fischer, Michael; Müller, Jens; Hoffmann, Martin; Käpplinger, Indira; Brode, Wolfgang; Magi, André; Biermann, Steffen; Pignanelli, Eliseo; Schütze, Andreas
Development and optimization of a fluidic sensor system based on silicon and ceramic microtechnology components :
Entwicklung und Optimierung mikrotechnischer Silizium- und Keramikkomponenten zur Realisierung eines Fluidiksensors. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Development and optimization of a fluidic sensor system based on silicon and ceramic microtechnology components :
Entwicklung und Optimierung mikrotechnischer Silizium- und Keramikkomponenten zur Realisierung eines Fluidiksensors. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Wulfmeier, Hendrik; Albrecht, Daniel; Fritze, Holger; Ivanov, Svetlozar; Bund, Andreas
Calorimetric measurement system based on planar temperature sensors for high-temperature investigations on thin films :
Kalorimetrisches Messsystem auf Basis planarer Temperatursensoren für die Untersuchung dünner Schichten im Hochtemperaturbereich. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Calorimetric measurement system based on planar temperature sensors for high-temperature investigations on thin films :
Kalorimetrisches Messsystem auf Basis planarer Temperatursensoren für die Untersuchung dünner Schichten im Hochtemperaturbereich. - In: Sensoren und Messsysteme 2014, (2014), insges. 6 S.
Weidner, Markus;
Halbedel, Bernd;
High T c superconducting bulk materials for the Lorentz force velocimetry in low conducting and slow flowing fluids. - In: Cryogenics 2014, ISBN 978-2-36215-002-9, (2014), S. 95-98
High T c superconducting bulk materials for the Lorentz force velocimetry in low conducting and slow flowing fluids. - In: Cryogenics 2014, ISBN 978-2-36215-002-9, (2014), S. 95-98
Cu-Nguyen, Phuong-Ha; Grewe, Adrian; Endrödy, Csaba; Sinzinger, Stefan; Zappe, Hans; Seifert, Andreas
Compact tunable hyperspectral imaging system. - In: IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), 2014, ISBN 978-1-4799-3510-9, (2014), S. 1167-1170
http://dx.doi.org/10.1109/MEMSYS.2014.6765854
Compact tunable hyperspectral imaging system. - In: IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS), 2014, ISBN 978-1-4799-3510-9, (2014), S. 1167-1170
http://dx.doi.org/10.1109/MEMSYS.2014.6765854
Geiling, Thomas; Dressler, Lothar; Welker, Tilo; Hoffmann, Martin
Fine dust measurement with electrical fields - concept of a hybrid particle detector. - In: 9th IMAPS/AcerS International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013), ISBN 978-1-62993-718-2, (2014), S. 131-136
Fine dust measurement with electrical fields - concept of a hybrid particle detector. - In: 9th IMAPS/AcerS International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013), ISBN 978-1-62993-718-2, (2014), S. 131-136
Leopold, Steffen; Geiling, Thomas; Fliegner, Caroline; Pätz, Daniel; Sinzinger, Stefan; Müller, Jens; Hoffmann, Martin
Multifunctional LTCC substrates for thermal actuation of tunable micro-lenses made of aluminum nitride membranes. - In: 9th IMAPS/AcerS International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013), ISBN 978-1-62993-718-2, (2014), S. 124-130
Multifunctional LTCC substrates for thermal actuation of tunable micro-lenses made of aluminum nitride membranes. - In: 9th IMAPS/AcerS International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2013), ISBN 978-1-62993-718-2, (2014), S. 124-130
Goj, Boris;
Dressler, Lothar; Hoffmann, Martin;
Semi-contact measurements of three-dimensional surfaces utilizing a resonant uniaxial microprobe. - In: Measurement science and technology, ISSN 1361-6501, Bd. 25 (2014), 6, S. 064012, insges. 9 S.
http://dx.doi.org/10.1088/0957-0233/25/6/064012
Semi-contact measurements of three-dimensional surfaces utilizing a resonant uniaxial microprobe. - In: Measurement science and technology, ISSN 1361-6501, Bd. 25 (2014), 6, S. 064012, insges. 9 S.
http://dx.doi.org/10.1088/0957-0233/25/6/064012
Korte, Stefan; Steidl, Matthias; Junker, Hubertus; Zhao, Weihong; Prost, Werner; Cherepanov, Vasily; Voigtländer, Bert; Kleinschmidt, Peter; Hannappel, Thomas
Resistance profiling of freestanding GaAs nanowires by multitip STM. - In: DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section [SKM] together with the DPG Divisions: Microprobes, the Working Groups: Industry and Business, young DPG as well as the Committee Accelerator Physics ; March 30 - April 4, 2014, Technical University of Dresden, 2014, HL 23.5
Resistance profiling of freestanding GaAs nanowires by multitip STM. - In: DPG-Frühjahrstagung (DPG Spring Meeting) of the Condensed Matter Section [SKM] together with the DPG Divisions: Microprobes, the Working Groups: Industry and Business, young DPG as well as the Committee Accelerator Physics ; March 30 - April 4, 2014, Technical University of Dresden, 2014, HL 23.5