Characterization and influence on the fatigue properties of the metal-turn-over of an electroless nickel coating on an AlCuMgFeNi alloy. - In: Galvanotechnik, ISSN 0016-4232, Bd. 109 (2018), 8, S. 1538-1547
Core-shell transformation-imprinted solder bumps enabling low-temperature fluidic self-assembly and self-alignment of chips and high melting point interconnects. - In: ACS applied materials & interfaces, ISSN 1944-8252, Bd. 10 (2018), 47, S. 40608-40613
https://doi.org/10.1021/acsami.8b12390
Mechanism of twin-reduced III-V epitaxy on As-modified vicinal Si(111). - In: Physical review materials, ISSN 2475-9953, Bd. 2 (2018), 12, S. 124601
https://doi.org/10.1103/PhysRevMaterials.2.124601
FDTS as dewetting coating for an electrowetting controlled silicon photonic switch. - In: IEEE photonics technology letters, Bd. 30 (2018), 23, S. 2005-2008
https://doi.org/10.1109/LPT.2018.2874351
Stress-adaptive meander track for stretchable electronics. - In: Flexible and printed electronics, ISSN 2058-8585, Bd. 3 (2018), 3, 032001, S. 1-7
Stretchable metallic interconnects are commonly designed using a meander-shaped metal track with a uniform width. This article reports on a 'stress-adaptive' metal track design which varies in width to accommodate the produced torque in the metal track during stretching. The stress-adaptive design is inspired by computational and experimental studies of two conventional meander-shape metal tracks identifying a common failure mode; specifically, the propagation of torque leading to twist and mechanical fatigue. The understanding gained led to the stress-adaptive design. The stress-adaptive structure is compared with horseshoe- and U-shaped references and shows improvements in the stress distribution, levels of twist, maximum level of elongation (>320%), and required stretch and release cycles (>6000 at 150% elongation) to cause failure in a long term cycling test.
https://doi.org/10.1088/2058-8585/aad583
Investigation of charge carrier depletion in freestanding nanowires by a multi-probe scanning tunneling microscope. - In: Nano research, ISSN 1998-0000, Bd. 11 (2018), 11, S. 5924-5934
https://doi.org/10.1007/s12274-018-2105-x
Understanding the charge storage mechanism of conductive polymers as hybrid battery-capacitor materials in ionic liquids by in situ atomic force microscopy and electrochemical quartz crystal microbalance studies. - In: Journal of materials chemistry, ISSN 2050-7496, Bd. 6 (2018), 36, S. 17787-17799
https://doi.org/10.1039/C8TA06757K
Direct growth of III-V/silicon triple-junction solar cells with 19.7% efficiency. - In: IEEE journal of photovoltaics, ISSN 2156-3403, Bd. 8 (2018), 6, S. 1590-1595
https://doi.org/10.1109/JPHOTOV.2018.2868015
PEDOT coated thick film electrodes for in situ detection of cell adhesion in cell cultures. - In: Biosensors, ISSN 2079-6374, Bd. 8 (2018), 4, 105, insges. 13 S.
https://doi.org/10.3390/bios8040105
Structural and optical properties of WS2 prepared using sulfurization of different thick sputtered tungsten films. - In: Applied surface science, Bd. 461 (2018), S. 133-138
Im Titel ist "2" tiefgestellt
https://doi.org/10.1016/j.apsusc.2018.05.209