Electrodeposition of reactive elements from ionic liquids. - In: Molten salts chemistry and technology, ISBN 978-1-118-44873-1, (2014), S. 359-364
Densification of thin aluminum oxide films by thermal treatments. - In: Materials sciences and applications, ISSN 2153-1188, Bd. 5 (2014), 8, S. 628-638
Thin AlOx films were grown on 4H-SiC by plasma-assisted atomic layer deposition (ALD) and plasma assisted electron-beam evaporation at 300˚C. After deposition, the films were annealed in nitrogen at temperatures between 500˚C and 1050˚C. The films were analyzed by X-ray reflectivity (XRR) and atomic force microscopy (AFM) in order to determine film thickness, surface roughness and density of the AlOx layer. No differences were found in the behavior of AlOx films upon annealing for the two different employed deposition techniques. Annealing results in film densification, which is most prominent above the crystallization temperature (800˚C). In addition to the increasing density, a mass loss of ˜5% was determined and attributed to the presence of aluminum oxyhydroxide in as deposited films. All changes in film properties after high temperature annealing appear to be independent of the deposition technique.
http://dx.doi.org/10.4236/msa.2014.58065
A first implementation of an automated reel-to-reel fluidic self-assembly machine. - In: Advanced materials, ISSN 1521-4095, Bd. 26 (2014), 34, S. 5942-5949
A first automated reel-to-reel fluidic selfassembly process for macroelectronic applications is reported. This system enables high-speed assembly of semiconductor dies (15 000 chips per hour using a 2.5 cm-wide web) over large-area substrates. The optimization of the system (>99% assembly yield) is based on identification, calculation, and optimization of the relevant forces. As an application, the production of a solid-state lighting panel is discussed, involving a novel approach to apply a conductive layer through lamination.
http://dx.doi.org/10.1002/adma.201401573
Diffusion in thin bilayer films during rapid thermal annealing. - In: Physica status solidi. Applications and materials science. - Weinheim : Wiley-VCH, 2005- , ISSN: 1862-6319 , ZDB-ID: 1481091-8, ISSN 1862-6319, Bd. 211 (2014), 11, S. 2635-2644
http://dx.doi.org/10.1002/pssa.201431039
Surface-enhanced Raman scattering (SERS) substrate based on large-area well-defined gold nanoparticle arrays with high SERS uniformity and stability. - In: ChemPlusChem, ISSN 2192-6506, Bd. 79 (2014), 11, S. 1622-1630
https://doi.org/10.1002/cplu.201402154
Synthesis and characterization of nickel-diamond nanocomposite layers. - In: Applied nanoscience, ISSN 2190-5517, Bd. 4 (2014), 8, S. 1021-1033
Erratum: Volume 4 (2014), 8, Seite 1035
http://dx.doi.org/10.1007/s13204-013-0285-y
Tribological behavior of selected M n+1 AX n phase thin films on silicon substrates. - In: Surface and coatings technology, ISSN 1879-3347, Bd. 257 (2014), S. 286-294
https://doi.org/10.1016/j.surfcoat.2014.08.034
Size effect of Young's modulus in AlN thin layers. - In: Journal of applied physics, ISSN 1089-7550, Bd. 116 (2014), 12, 124306, insges. 4 S.
https://doi.org/10.1063/1.4896496
Laser gas-assisted nitriding of Ti alloys. - In: Laser machining and surface treatment, ISBN 978-0-08-096598-7, (2014), S. 261-278
Improvement of P3HT-ICBA solar cell photovoltaic characteristics due to the incorporation of the maleic anhydride additive: P3HT morphology study of P3HT-ICBA and P3HT-ICBA-MA films by means of X-band LESR. - In: Synthetic metals, Bd. 197 (2014), S. 210-216
http://dx.doi.org/10.1016/j.synthmet.2014.09.012