Optimierung der Spaltüberbrückung beim Laserstrahlschweißen von dünnen Blechen durch eine zweite Wärmequelle. - In: DVS Congress 2014, (2014), S. 10-14
http://www.db-thueringen.de/servlets/DocumentServlet?id=24549
AWUSYS : Entwicklung eines hochpräzisen und zeiteffizienten industriellen Auswuchtsystems. - Ilmenau : Universitätsverlag Ilmenau, 2014. - Online-Ressource (PDF-Datei: VIII, 101 S., 8,24 MB). - (Fertigungstechnik - aus den Grundlagen für die Anwendung : Schriften aus der Ilmenauer Fertigungstechnik ; 1)Unterschiede zwischen dem gedruckten Dokument und der elektronischen Ressource können nicht ausgeschlossen werden
Im Rahmen des Projektes "Awusys" erfolgte die disziplinübergreifende Entwicklung eines hochpräzisen und zeiteffizienten industriellen Auswuchtsystems, welches neben der Unwuchtbestimmung zeitgleich Unwuchtkorrekturen mit höchster Genauigkeit umsetzen kann. Im Vergleich zu bestehenden Systemen sollte eine Genauigkeit bei der Unwuchtbestimmung von üblicherweise +/- 0,1 g auf +/- 0,01 g umgesetzt werden. Selbiges galt für den notwenigen Masseauf- und Masseabtrag, der mit einer Genauigkeit im 1/100 Bereich realisiert werden sollte. Die Entwicklung eines derartigen Systems wurde durch die Erarbeitung und Entwicklung unterschiedlicher Ansätze aus den Bereichen der Konstruktion, der Softwaretechnik, der Messtechnik, der Handhabetechnik und der Fertigungstechnik erfolgreich umgesetzt und in Form eines rechnergestützten Versuchsstandes zusammengeführt.
http://www.db-thueringen.de/servlets/DocumentServlet?id=24538
Macroscopic surface structures for polymer-metal hybrid joints manufactured by laser based thermal joining. - In: Physics procedia, ISSN 1875-3892, Bd. 56 (2014), S. 782-790
http://dx.doi.org/10.1016/j.phpro.2014.08.086
Examinations on laser remote welding of ultra-thin metal foils under vacuum conditions. - In: Physics procedia, ISSN 1875-3892, Bd. 56 (2014), S. 768-775
https://doi.org/10.1016/j.phpro.2014.08.084
Process-limiting factors and characteristics of laser-based micro welding. - In: Physics procedia, ISSN 1875-3892, Bd. 56 (2014), S. 740-749
http://dx.doi.org/10.1016/j.phpro.2014.08.081
Optimization strategies for laser welding high alloy steel sheets. - In: Physics procedia, ISSN 1875-3892, Bd. 56 (2014), S. 1242-1251
A known phenomenon during laser welding of thin sheets is the deformation caused by thermally induced stresses. This deformation can result in a change of the gap width between the welded parts, which leads to an unstable welding process. Inducing displacements by using a second heat source will compensate for the change in gap width, hence optimizing the welding process. The base material is 1 mm thick austenitic stainless steel 1.4301, which is welded by a CO2 laser. The second heat source is a diode laser. The gap between the welded parts was set between 0.05 mm and 0.1 mm. The influence of the second heat source on the welding process and the welding result is described. The usage of a second heat source allows a higher gap width to be set prior to the welding process. The results of the numerical simulation were found to be corresponding to those of the experiments.
http://dx.doi.org/10.1016/j.phpro.2014.08.040
Optimization strategies for laser welding high alloy steel sheets. - In: Thermal forming and welding distorsion, (2014), S. 95-107
Remote micro welding with multi-mode and single-mode fiber lasers - a comparison. - In: Journal of laser applications, ISSN 1938-1387, (2013), 1, S. 805-815
https://doi.org/10.2351/1.5062971
Effects of dual-beam laser welding and pulse shaping on cracking susceptibility of AA 5754 aluminum. - In: Journal of laser applications, ISSN 1938-1387, (2013), 1, S. 415-421
Paper number 1505
https://doi.org/10.2351/1.5062909