Sustainable harnessing of waste polycarbonate for synthesizing activated furans to generate Stenhouse adducts on polymer surface. - In: Chemistry, ISSN 1861-471X, Bd. 19 (2024), 13, e202400369, S. 1-11
Plastics are versatile materials, offering lightweight, durable, and affordable solutions across various industries. However, their non-degradable nature poses challenges by end of their life. This study presented an innovative carbonyl extraction method to utilize waste poly(bisphenol A carbonate) (PC) as reaction precursor to synthesis of activated furan as precursor for photoswitchable Stenhouse adducts. This innovative chemical strategy not only generated N,N’-functionalized barbiturates but also provided an eco-friendly and cost-effective alternative to traditional synthesis methods. The method presented hereby not only promotes sustainability by repurposing waste polycarbonate as carbonyl equivalent under green conditions but also yielded reusable bisphenol A (BPA). Furthermore, the derived activated furans exhibited their functionality by forming colored donor-acceptor Stenhouse adducts (DASAs) on aminated polymer surfaces. This work demonstrated a transition from a linear plastics economy toward a circular one, highlighting the potential of plastic waste as a resource for creating materials with improved properties.
https://doi.org/10.1002/asia.202400369
Modular air-liquid interface aerosol exposure system (MALIES) to study toxicity of nanoparticle aerosols in 3D-cultured A549 cells in vitro. - In: Archives of toxicology, ISSN 1432-0738, Bd. 98 (2024), 4, S. 1061-1080
We present a novel lung aerosol exposure system named MALIES (modular air-liquid interface exposure system), which allows three-dimensional cultivation of lung epithelial cells in alveolar-like scaffolds (MatriGrids®) and exposure to nanoparticle aerosols. MALIES consists of multiple modular units for aerosol generation, and can be rapidly assembled and commissioned. The MALIES system was proven for its ability to reliably produce a dose-dependent toxicity in A549 cells using CuSO4 aerosol. Cytotoxic effects of BaSO4- and TiO2-nanoparticles were investigated using MALIES with the human lung tumor cell line A549 cultured at the air-liquid interface. Experiments with concentrations of up to 5.93 × 10^5 (BaSO4) and 1.49 × 10^6 (TiO2) particles/cm^3, resulting in deposited masses of up to 26.6 and 74.0 µg/cm^2 were performed using two identical aerosol exposure systems in two different laboratories. LDH, resazurin reduction and total glutathione were measured. A549 cells grown on MatriGrids® form a ZO-1- and E-Cadherin-positive epithelial barrier and produce mucin and surfactant protein. BaSO4-NP in a deposited mass of up to 26.6 µg/cm^2 resulted in mild, reversible damage (˜ 10% decrease in viability) to lung epithelium 24 h after exposure. TiO2-NP in a deposited mass of up to 74.0 µg/cm^2 did not induce any cytotoxicity in A549 cells 24 h and 72 h after exposure, with the exception of a 1.7 fold increase in the low exposure group in laboratory 1. These results are consistent with previous studies showing no significant damage to lung epithelium by short-term treatment with low concentrations of nanoscale BaSO4 and TiO2 in in vitro experiments.
https://doi.org/10.1007/s00204-023-03673-3
Comparison of a 3D co-culture and a mini organ culture by testing barium sulphate and titanium dioxide nanoparticle aerosols. - In: Naunyn-Schmiedeberg's archives of pharmacology, ISSN 1432-1912, Bd. 396 (2023), 1, P055, S. S37
https://doi.org/10.1007/s00210-023-02397-6
Advanced 3D cell culturing and monitoring system. - Ilmenau : Universitätsbibliothek, 2023. - 1 Online-Ressource (213 Seiten)
Technische Universität Ilmenau, Dissertation 2023
Die vorgelegte Doktorarbeit stellt ein 3D-Zellkultursystem mit einem vollautomatisierten analytischen, biochemischen Assay und vollautomatisierter Kultivierung mit Mediumwechsel vor. Dieses integrierte Kultivierungs- und Analysesystem wurde in dieser Arbeit mit 3D-Hepatozytenkulturen in Polycarbonat-MatriGrid®-Gerüsten für das 3D-Wachstum von Zellkulturen prototypisiert. Das System perfundiert MatriGrid- Kulturen kontinuierlich mit Wirkstoff-ergänztem Medium und führt bei Bedarf eine Bewertung der Wirkstofftoxizität durch Beobachtung und Messung der Konzentration eines Indikators, des Biomarkers Albumin, durch. Das System kann die MatriGrid-Kultur mit unterschiedlichen Flussraten perfundieren, automatisierte Medienwechsel durchführen und mit dem mitgelieferten ELISA-Modul Proben des zu analysierenden Kulturmediums nach Bedarf untersuchen. Das System unterstützt die parallele Kultivierung von Zellen in mehreren Bioreaktoren. Das Fluidnetzwerk wurde aus Materialien konstruiert, die wenig Proteine und kleine Moleküle binden, absorbieren oder adsorbieren, um seine Anwendung für niedrige Biomarkerkonzentrationen und Langzeitexperimente zu erweitern. Die Doktorarbeit beschreibt das Systemdesign, den Aufbau, das Testen und die Verifikation unter Verwendung von 3D-gewachsenen HepaRG-Zellkulturen. Die zeitabhängige Wirkung von APAP auf die Albuminsekretion wurde über 96 h untersucht, wobei sowohl mit dem neu entwickelten System als auch konventionell in Mikrotiterplatten, gemessen wurde. Es zeigte sich, dass die Ergebnisse vergleichbar sind. Dieses Resultat belegt die Verwendung des Systems als eigenständiges Gerät, das in Echtzeit arbeitet und in der Lage ist, gleichzeitig Zellkultur- und Mediumanalyse in mehreren Bioreaktoren durchzuführen, mit erhöhter Zuverlässigkeit der 3D-Kultivierung, in einfacher Handhabung und Messung. Auf diese Weise soll das neu entwickelte 3D-Zellkultivierungs- und Analysesystem 3D-Zellkultivierungstechniken und -experimente für weitere Forschungsgruppen bekannt machen.
https://doi.org/10.22032/dbt.59056
Visible-light-assisted donor-acceptor-Stenhouse-adduct-based reversible photoswitching on a laser-structurable OrmoComp substrate. - In: ACS applied polymer materials, ISSN 2637-6105, Bd. 5 (2023), 10, S. 8631-8640
Laser-assisted nanolithography of commercially available photoresists is offering a limitless designing opportunity in the micro- and nanostructuring of 3D organotypic cell culture scaffolds. Among them, chemically functionalized OrmoComp has shown promising improvement in cell adhesion that paves the way to assemble cellular entities on a desirable geometry. Establishing a photoswitchable chemistry on the OrmoComp surface may offer an additional degree of freedom to manipulate the surface chemistry locally and selectively. We have established the methods for functionalization of the photopolymerized OrmoComp surface with visible-light-switchable donor-acceptor Stenhouse adducts. Unlike other polymers, a photopolymerized OrmoComp surface appears to be optimal for reversible photothermal switching, offering the possibility to influence surface properties like absorption and hydrophilicity tremendously. Light-assisted chemical modulation between colored triene-2-ol and colorless cyclopentenone can be achieved to a size region as narrow as 20 μm. Thermal reversion to the original triene-2-ol state can be analyzed spectroscopically and observed with the naked eye.
https://doi.org/10.1021/acsapm.3c01766
Meldrum’s acid furfural conjugate MAFC: a new entry as chromogenic sensor for specific amine identification. - In: Molecules, ISSN 1420-3049, Bd. 28 (2023), 18, 6627, S. 1-17
Bioactive amines are highly relevant for clinical and industrial application to ensure the metabolic status of a biological process. Apart from this, generally, amine identification is a key step in various bioorganic processes ranging from protein chemistry to biomaterial fabrication. However, many amines have a negative impact on the environment and the excess intake of amines can have tremendous adverse health effects. Thus, easy, fast, sensitive, and reliable sensing methods for amine identification are strongly searched for. In the past few years, Meldrum’s acid furfural conjugate (MAFC) has been extensively explored as a starting material for the synthesis of photoswitchable donor-acceptor Stenhouse adducts (DASA). DASA formation hereby results from the rapid reaction of MAFC with primary and secondary amines, which has so far been demonstrated through numerous publications for different applications. The linear form of the MAFC-based DASA exhibits intense pink coloration due to its linear conjugated triene-2-ol conformation, which has inspired researchers to use this easy synthesizable molecule as an optical sensor for primary, secondary, and biogenic amines. Due to its new entry into amine identification, a collection of the literature exclusively on MAFC is demanded. In this mini review, we intend to present the state-of-the-art of MAFC as an optical molecular sensor in hopes to motivate researchers to find even more applications of MAFC-based sensors and methods that pave the way to their usage in medicinal applications.
https://doi.org/10.3390/molecules28186627
In vitro-Amplifikation humaner hämatopoetischer Stammzellen im 3D-System. - In: Biospektrum, ISSN 1868-6249, Bd. 28 (2022), 5, S. 489-492
A promising strategy to increase the numbers of hematopoietic stem cells (HSCs) for clinical applications, like stem cell transplantation, is offered by advanced in vitro culture systems. We developed artificial 3D bone marrow-like scaffolds made of polydimethylsiloxane (PDMS) mimicking the natural HSC niche in vitro. These 3D PDMS scaffolds in combination with an optimized culture medium allow the amplification of high numbers of undifferentiated HSCs by activating specific molecular signaling pathways.
https://doi.org/10.1007/s12268-022-1798-2
From microtiter plates to droplets - there and back again. - In: Micromachines, ISSN 2072-666X, Bd. 13 (2022), 7, 1022, S. 1-13
Droplet-based microfluidic screening techniques can benefit from interfacing established microtiter plate-based screening and sample management workflows. Interfacing tools are required both for loading preconfigured microtiter-plate (MTP)-based sample collections into droplets and for dispensing the used droplets samples back into MTPs for subsequent storage or further processing. Here, we present a collection of Digital Microfluidic Pipetting Tips (DMPTs) with integrated facilities for droplet generation and manipulation together with a robotic system for its operation. This combination serves as a bidirectional sampling interface for sample transfer from wells into droplets (w2d) and vice versa droplets into wells (d2w). The DMPT were designed to fit into 96-deep-well MTPs and prepared from glass by means of microsystems technology. The aspirated samples are converted into the channel-confined droplets’ sequences separated by an immiscible carrier medium. To comply with the demands of dose-response assays, up to three additional assay compound solutions can be added to the sample droplets. To enable different procedural assay protocols, four different DMPT variants were made. In this way, droplet series with gradually changing composition can be generated for, e.g., 2D screening purposes. The developed DMPT and their common fluidic connector are described here. To handle the opposite transfer d2w, a robotic transfer system was set up and is described briefly.
https://doi.org/10.3390/mi13071022
MatriGrid® based biological morphologies: tools for 3D cell culturing. - In: Bioengineering, ISSN 2306-5354, Bd. 9 (2022), 5, 220, S. 1-41
Recent trends in 3D cell culturing has placed organotypic tissue models at another level. Now, not only is the microenvironment at the cynosure of this research, but rather, microscopic geometrical parameters are also decisive for mimicking a tissue model. Over the years, technologies such as micromachining, 3D printing, and hydrogels are making the foundation of this field. However, mimicking the topography of a particular tissue-relevant substrate can be achieved relatively simply with so-called template or morphology transfer techniques. Over the last 15 years, in one such research venture, we have been investigating a micro thermoforming technique as a facile tool for generating bioinspired topographies. We call them MatriGrid®s. In this research account, we summarize our learning outcome from this technique in terms of the influence of 3D micro morphologies on different cell cultures that we have tested in our laboratory. An integral part of this research is the evolution of unavoidable aspects such as possible label-free sensing and fluidic automatization. The development in the research field is also documented in this account.
https://doi.org/10.3390/bioengineering9050220
Automated analysis of acetaminophen toxicity on 3D HepaRG cell culture in microbioreactor. - In: Bioengineering, ISSN 2306-5354, Bd. 9 (2022), 5, 196, S. 1-16
Real-time monitoring of bioanalytes in organotypic cell cultivation devices is a major research challenge in establishing stand-alone diagnostic systems. Presently, no general technical facility is available that offers a plug-in system for bioanalytics in diversely available organotypic culture models. Therefore, each analytical device has to be tuned according to the microfluidic and interface environment of the 3D in vitro system. Herein, we report the design and function of a 3D automated culture and analysis device (3D-ACAD) which actively perfuses a custom-made 3D microbioreactor, samples the culture medium and simultaneously performs capillary-based flow ELISA. A microstructured MatriGrid® has been explored as a 3D scaffold for culturing HepaRG cells, with albumin investigated as a bioanalytical marker using flow ELISA. We investigated the effect of acetaminophen (APAP) on the albumin secretion of HepaRG cells over 96 h and compared this with the albumin secretion of 2D monolayer HepaRG cultures. Automated on-line monitoring of albumin secretion in the 3D in vitro mode revealed that the application of hepatotoxic drug-like APAP results in decreased albumin secretion. Furthermore, a higher sensitivity of the HepaRG cell culture in the automated 3D-ACAD system to APAP was observed compared to HepaRG cells cultivated as a monolayer. The results support the use of the 3D-ACAD model as a stand-alone device, working in real time and capable of analyzing the condition of the cell culture by measuring a functional analyte. Information obtained from our system is compared with conventional cell culture and plate ELISA, the results of which are presented herein.
https://doi.org/10.3390/bioengineering9050196
Bio-inspired 3D micro structuring of a liver lobule via direct laser writing: a comparative study with SU-8 and SUEX. - In: Journal of laser applications, ISSN 1938-1387, Bd. 34 (2022), 1, 012007, S. 012007-1-012007-12
Real biological tissues show a great variety of different geometric morphologies with special features on different geometric scales. An interesting example is the liver lobule that is the basic subunit of a liver. The lobule is a quasihexagonal macroscopic structure with periodic like so-called sinusoidal elements with structural features on the micro- and macroscale made of proteins, cells, and fluids. Various tools from micromachining and nanotechnology have demonstrated their capabilities to construct micromorphologies precisely, but even the reconstruction of such a system in technical polymers is challenging. In this work, the rapidly evolving technique of multiphoton polymerization has been explored for the construction of a scaffold that mimics the micromorphology of the liver with high resolution and detail up to the millimeter scale. At the end, a highly complex fluidically perfusable structure was achieved and simulations showed that the occurring shear stress, fluid velocity, and stream lines are comparable to the native liver lobule. Hereby, the photoresists SU-8 and SUEX TDFS were compared in terms of their processability, achievable resolution, and suitability for the intended application. Our results have shown that SUEX needs lower writing velocities but is easier to process and achieves a considerable higher resolution than SU-8. The scaffold could provide a base frame with a geometrically defined morphology for hepatic cells to adhere to, which could act as a starting point for cells to build new liver tissue for further integration in more complex systems.
https://doi.org/10.2351/7.0000433
Fabrication and characterization of microstructured scaffolds for complex 3D cell cultures. - Ilmenau : Universitätsbibliothek, 2021. - 1 Online-Ressource (XII, 140 Seiten)
Technische Universität Ilmenau, Dissertation 2021
In einem natürlichen Gewebe wird das zelluläre Verhalten durch Stimuli der Mikroumgebung reguliert. Verschiedene chemische, mechanische und physikalische Reize befinden sich in einem lokalen Milieu und versorgen die Zellen mit einem biologischen Kontext. Im Vergleich zur in vivo Situation, zeigen Standard 2D in vitro Zellkulturmodelle viele Unterschiede in der zellulären Mikroumgebung und können infolgedessen eine Veränderung der Zellantwort verursachen. Die Schaffung einer physiologisch realistischeren Umgebung auf künstlichem Substrat ist ein Schlüsselfaktor für die Entwicklung zuverlässiger Plattformen, die es den kultivierten Zellen ermöglichen, sich natürlicher zu verhalten. Daher sind neuartige Substrate auf Biomaterialbasis mit maßgeschneiderten Eigenschaften sehr gefragt. Die Mikrotechnik ist ein leistungsstarkes Werkzeug, das bei der Herstellung der Funktionsgerüste hilft, um verschiedene Eigenschaften der in vivo Umgebung zu reproduzieren und auf in vitro Bedingungen zu übertragen. Die Gerüstkonstruktionsparameter können manipuliert werden, um die für das jeweilige Gewebe spezifischen Anforderungen zu erfüllen. Eine der grundlegenden Einschränkungen bei aktuellen Herstellungsverfahren ist jedoch die Unfähigkeit, mehrere Gerüsteigenschaften auf vorgefertigte Weise in eine einzelne Gerüststruktur zu integrieren. Diese Dissertation befasst sich mit Gerüstmikrofabrikations- und Oberflächenmodifikations-techniken, welche die Mikrostrukturierungstechnologie verwenden und die gleichzeitige Kontrolle über verschiedene Gerüsteigenschaften ermöglichen. Diese Ansätze bei der Mikrofabrikation von Polymergerüsten werden verwendet, um physikalische und chemische Eigenschaften bereitzustellen, die für die Leberzellkultur optimiert sind. Die physikochemischen Aspekte, die die zelluläre Mikroumgebung von Lebergewebe in vivo ausmachen, werden diskutiert und anschließend werden relevante Technologien vorgestellt, mit denen einige dieser Aspekte in vitro reguliert werden können. Im ersten Teil dieser Arbeit wird ein neuartiges zweistufiges Verfahren zur Herstellung von Polymergerüsten mit mikroporöser Struktur und definierter Topographie gezeigt. Um 3D-Matrizen mit integrierter Porosität zu erhalten, wurde nach der Herstellung mikroporöser Folien ein Mikrostrukturierungsprozess unter Verwendung der Mehrschicht Polymer-Thermoformtechnologie durchgeführt. Diese Methoden wurden verwendet, um Substrate für die organotypische 3D-Hepatozytenkultivierung herzustellen. Poröse Gerüste mit Mikrokavitäten wurden aus lösungsmittelgegossenen und phasengetrennten Polymilchsäure (PLA) Folien gebildet. Die Proben wurden auf grundlegende mechanische und Oberflächenspezifische Eigenschaften sowie auf die Zellleistung untersucht. Um einen Bezugspunkt für die Bewertung der hergestellten Matrices bereitzustellen, wurden PLA-Gerüste mit zuvor beschriebenen Substraten auf Polycarbonat (PC)-Basis mit ähnlicher Geometrie verglichen. HepG2-Zellen, die in PLA-Gerüsten kultiviert wurden, zeigten eine gewebeartige 3D-Aggregation und eine erhöhte Sekretionsrate von Albumin im Vergleich zu PC-Gerüsten. Anschließend wurde dieses zweistufige Herstellungsverfahren verwendet, um schnell abbaubare Gerüste für die gerüstfreie Zellblatttechnik herzustellen. Gerüste mit kontrollierter Porosität und Topographie, die die Schlüsselmerkmale von Lebersinusoiden nachahmen, wurden aus Poly(milch-co-glykolsäure) (PLGA)-Copolymer hergestellt und für den in vitro Abbau in Zellkultur charakterisiert. Um die Beziehung zwischen dem Abbau des Gerüsts und der Organisation der Zellen in der PLGA-Matrix aufzudecken, wurde die Lebensfähigkeit und Morphologie der kultivierten Zellen zusammen mit der Morphologie des Gerüsts untersucht. Im zweiten Teil dieser Arbeit wurden verschiedene technische Lösungen für die gerichtete Strukturierung mikroporöser Polymergerüste bewertet und ihre Eignung zur Erzeugung einer benutzerdefinierten lebenswichtigen oligozellulären Morphologie auf künstlichem Substrat vorgestellt. Besonderes Augenmerk wurde auf das 3D-Mikrokontaktdruckverfahren (3DµCP) gelegt, das die Vorteile des Mikrothermoformens und des Mikrokontaktdrucks kombiniert und eine räumlich-zeitliche Kontrolle über morphologische und chemische Merkmale in einem einzigen Schritt ermöglicht. Um das Potenzial dieser Technik aufzuzeigen, wurden Gerüste mit bestimmten Mikrostrukturen wie Kanäle mit verschiedenen Tiefen und Breiten sowie komplexere Muster hergestellt und verschiedene ECM-Moleküle gleichzeitig in die vordefinierten Geometrien übertragen. Die Gültigkeit des 3DµCP-Prozesses wurde durch mikroskopische Messungen, Fluoreszenzfärbung und Testen der Substrate auf Zelladhäsionsantwort gezeigt. Schließlich wird in dieser Arbeit die Herstellungsmethode zur Erzeugung komplexer Gerüste für die 3D- und gesteuerte Co-Kultivierung von Leberzellen vorgestellt. Polymermatrizen, die die grundlegende Leberarchitektur replizieren und somit eine gut organisierte Leberzellzusammensetzung ermöglichen, wurden erfolgreich unter Verwendung der 3DµCP-Methode hergestellt. Auf der Polycarbonatoberfläche wurden gleichzeitig chemische und topografische Leitfäden in Form sinusförmiger Strukturen strukturiert. Um die 3D-Gewebemikrostruktur zu replizieren, wurden EA.hy926- und HepG2-Zellen auf beiden Seiten des strukturierten porösen Gerüsts Co-kultiviert und anschließend einander gegenüber gestapelt, wodurch zugehörige Kanäle zur Bildung einer Kapillare führen. Das Potenzial unseres 3DµCP-strukturierten Gerüsts für die gerichtete Co-Kultivierung von Zellen wurde unter statischen Zellkulturbedingungen demonstriert. Am Ende wurden Gerüste für die weiteren Anwendungen im perfundierten Bioreaktorsystem angepasst.
https://doi.org/10.22032/dbt.50717
pH-dependent selective colorimetric detection of proline and hydroxyproline with Meldrum's acid-furfural conjugate. - In: Chemosensors, ISSN 2227-9040, Bd. 9 (2021), 12, 343, S. 1-13
Activated 2-furfural gives intense color formation when reacted with amines, due to a ring opening reaction cascade that furnishes a conjugated molecular system. Unique colorimetric characteristic of this reaction makes it an interesting candidate for developing chemosensors operating in visible range. Among many activated 2-furfural derivatives, Meldrum's acid furfural conjugate (MAFC) recently gained significant interest as colorimetric chemosensor. MAFC has been explored as selective chemosensor for detecting amines in solution, secondary amines on polymer surfaces and even nitrogen rich amino acids (AA) in aqueous solution. In this work, the pH dependency of MAFC-AA reaction is explored. It was found that proline gives an exceptionally fast colored reaction at pH 11, whereas at other pHs, no naked eye color product formation was observed. The reaction sequence including ring opening reaction upon nucleophilic addition of cyclic amine of proline resulting in a conjugated triene was confirmed by NMR titrations. The highly pH dependent reaction can e.g., potentially be used to detect proline presence in biological samples. An even more intense color formation takes place in the reaction of natural proline derivative 4-hydroxyproline. The detection limit of proline and 4-hydroxyproline with MAFC solution was found to be 11 [my]M and 6 [my)M respectively.
https://doi.org/10.3390/chemosensors9120343
Molecular characterization of hematopoietic stem cells after in vitro amplification on biomimetic 3D PDMS cell culture scaffolds. - In: Scientific reports, ISSN 2045-2322, Bd. 11 (2021), 21163, S. 1-14
Hematopoietic stem cell (HSC) transplantation is successfully applied since the late 1950s. However, its efficacy can be impaired by insufficient numbers of donor HSCs. A promising strategy to overcome this hurdle is the use of an advanced ex vivo culture system that supports the proliferation and, at the same time, maintains the pluripotency of HSCs. Therefore, we have developed artificial 3D bone marrow-like scaffolds made of polydimethylsiloxane (PDMS) that model the natural HSC niche in vitro. These 3D PDMS scaffolds in combination with an optimized HSC culture medium allow the amplification of high numbers of undifferentiated HSCs. After 14 days in vitro cell culture, we performed transcriptome and proteome analysis. Ingenuity pathway analysis indicated that the 3D PDMS cell culture scaffolds altered PI3K/AKT/mTOR pathways and activated SREBP, HIF1α and FOXO signaling, leading to metabolic adaptations, as judged by ELISA, Western blot and metabolic flux analysis. These molecular signaling pathways can promote the expansion of HSCs and are involved in the maintenance of their pluripotency. Thus, we have shown that the 3D PDMS scaffolds activate key molecular signaling pathways to amplify the numbers of undifferentiated HSCs ex vivo effectively.
https://doi.org/10.1038/s41598-021-00619-6
Cost-effective sensor for flow monitoring in biologic microreactors. - In: IEEE sensors journal, ISSN 1558-1748, Bd. 21 (2021), 19, S. 21314-21321
https://doi.org/10.1109/JSEN.2021.3102262
Colorimetric method for instant detection of lysine and arginine using novel Meldrum's acid-furfural conjugate. - In: ChemistrySelect, ISSN 2365-6549, Bd. 6 (2021), 27, S. 6834-6840
In the past few years Meldrum's acid furfural conjugate (MAFC) have been extensively explored as starting material for the synthesis of photo switchable donor acceptor stenhouse adducts (DASA). Hereby, we have explored the interaction of MAFC with various amino acids. To our surprise, nitrogen rich amino acids like lysine and arginine interact spontaneously with MAFC to give colored adduct immediately, whereas other amino acids, including nitrogen rich histidine, didn't show any coloration. Naked eye detection of lysine in benign solvent make this reagent an attractive new entry to the collection of chemosensors for the colorimetric detection of lysine and arginine. Intense coloration corresponds to the absorption at 514 nm under UV-Vis spectrometer. Lowest concentration of 100 μm can be detected with UV-Vis spectrometer. NMR titrations reveals that the appearance of color is due to ring opening of a furfural that leads to the formation of conjugated triene species. Compared to previously reported chemosensors for lysine and arginine, MAFC offers advantages including simple synthesis, easy handling, high speed, low cost, good sensitivity/selectivity.
https://doi.org/10.1002/slct.202101140
Biomimetic reconstruction of the hematopoietic stem cell niche for in vitro amplification of human hematopoietic stem cells. - In: PLOS ONE, ISSN 1932-6203, Bd. 15 (2020), 6, e0234638, insges. 17 S.
https://doi.org/10.1371/journal.pone.0234638
Establishment of a lung cell Co-culture model for nanoparticle aerosol exposition. - In: Naunyn-Schmiedeberg's archives of pharmacology, ISSN 1432-1912, Bd. 393 (2020), 1, S. S56
https://doi.org/10.1007/s00210-020-01828-y
Vorhabensbezeichnung: VIP+-Nachbildung der Blutstammzellnische : Schlussbericht zu Nr. 3.2 : Laufzeit des Vorhabens: 01.05.2016 bis 30.09.2019 : Berichtszeitraum: 01.05.2016 bis 31.10.2019. - [Ilmenau] : TU Ilmenau. - 1 Online-Ressource (24 Seiten, 1,48 MB)Förderkennzeichen BMBF 03VP00591
https://doi.org/10.2314/KXP:1775832678
Biomimetic reconstruction of tissue structures using the example of the hematopoietic stem cell niche for the in vitro amplification of human hematopoietic stem cells. - In: Bone marrow transplantation, ISSN 1476-5365, Bd. 54 (2019), S. 365-366
P341
https://doi.org/10.1038/s41409-019-0559-4
Chemical toolbox for designing small bioactive molecules and fragments in search of tunable bioactive surfaces. - Ilmenau. - 297 Seiten
Technische Universität Ilmenau, Habilitationsschrift 2019
Enthält 20 Schriften
Expanded primary human liver sinusoidal endothelial cells as a predictive tool in hepatotoxicity evaluation. - In: Drug metabolism and pharmacokinetics, ISSN 1880-0920, Bd. 34 (2019), 1, Suppl., Seite S51
https://doi.org/10.1016/j.dmpk.2018.09.181
BioLithoMorphie® - a toolbox for the construction of 3D biological morphologies. - In: Technische Systeme für die Lebenswissenschaften, (2018), S. 255-264
Application of BioLithoMorphie® in the case of lung and nerve cell cultures. - In: Technische Systeme für die Lebenswissenschaften, (2018), S. 231-234
PEDOT coated thick film electrodes for in situ detection of cell adhesion in cell cultures. - In: Biosensors, ISSN 2079-6374, Bd. 8 (2018), 4, 105, insges. 13 S.
https://doi.org/10.3390/bios8040105
Multilayer ceramics as integration platform for sensors in in-vitro cell culture reactors. - In: Advanced materials letters, Bd. 9 (2018), 11, S. 748-752
https://doi.org/10.5185/amlett.2018.2090
Localized collection of airborne biological hazards for environmental monitoring. - In: Sensors and actuators, ISSN 0925-4005, Bd. 273 (2018), S. 906-915
https://doi.org/10.1016/j.snb.2018.06.129
3D microcontact printing for combined chemical and topographical patterning on porous cell culture membrane. - In: ACS applied materials & interfaces, ISSN 1944-8252, Bd. 10 (2018), 26, S. 22857-22865
https://doi.org/10.1021/acsami.8b06585
Donor-acceptor Stenhouse adduct-grafted polycarbonate surfaces: selectivity of the reaction for secondary amine on surface. - In: Royal Society Open Science, ISSN 2054-5703, Bd. 5 (2018), 7, 180207, insges. 7 S.
https://doi.org/10.1098/rsos.180207
Functionalized thick film impedance sensors for use in in vitro cell culture. - In: Biosensors, ISSN 2079-6374, Bd. 8 (2018), 2, 37, insges. 9 S.
https://doi.org/10.3390/bios8020037
LTCC-based micro plasma source for the selective treatment of cell cultures. - In: Proceedings of the 21st European Microelectronics Packaging Conference (EMPC 2017), ISBN 978-0-9568086-4-6, (2017), insges. 5 S.
https://doi.org/10.23919/EMPC.2017.8346855
Keramische Mikro-Plasmaquelle für die selektive Behandlung von Zellkulturen. - In: MikroSystemTechnik Kongress 2017 "MEMS, Mikroelektronik, Systeme", (2017), S. 762-765
Three-dimensional tumor cell growth stimulates autophagic flux and recapitulates chemotherapy resistance. - In: Cell death & disease, ISSN 2041-4889, Bd. 8 (2017), (24. Aug.), e3013, insges. 16 S.
https://doi.org/10.1038/cddis.2017.398
A novel 384-multiwell microelectrode array for the impedimetric monitoring of Tau protein induced neurodegenerative processes. - In: Biosensors and bioelectronics, ISSN 1873-4235, Bd. 88 (2015), S. 78-84
http://dx.doi.org/10.1016/j.bios.2016.07.074
Surface refinement of thick film gold electrodes for 3D MEAs using electro polymerization of PEDOT. - Reutlingen. - 1 Online-Ressource (1 Seiten)Publikation entstand im Rahmen der Veranstaltung: MEA Meeting 2016, 10th International Meeting on Substrate-Integrated Electrode Arrays, Reutlingen, Germany, 28 Jun - 1 Jul, 2016. - (Frontiers in Neuroscience Conference Abstract)
http://dx.doi.org/10.3389/conf.fnins.2016.93.00094
Construction of 3D biological morphologies using lithographic methods - BioLithoMorphie. - In: Technische Systeme für die Lebenswissenschaften, (2016), S. 533-536
Three-dimensional tumor cell growth models in vivo drug resistance mechanisms. - In: Klinische Pädiatrie, ISSN 1439-3824, Bd. 228 (2016), 6/7, A2
http://dx.doi.org/10.1055/s-0036-1593549
Microbial electrochemical systems with future perspectives using advanced nanomaterials and microfluidics. - In: Advanced energy materials, ISSN 1614-6840, Bd. 6 (2016), 23, 1600690, insges. 10 S.
http://dx.doi.org/10.1002/aenm.201600690
A selectively permeable membrane for enhancing cyclability of organic sodium-ion batteries. - In: Advanced materials, ISSN 1521-4095, Bd. 28 (2016), 41, S. 9182-9187
http://dx.doi.org/10.1002/adma.201603240
Nitric oxide an pH measurement with AlGaN/GaN based ISFETs. - Ilmenau : Universitätsbibliothek, 2016. - 1 Online-Ressource (VI, 127 Seiten)
Technische Universität Ilmenau, Dissertation 2016
Diese Arbeit befasst sich mit der Optimierung von Aluminium-Gallium-Nitrid/Gallium-Nitrid (AlGaN/GaN) -Ionen-sensitiven-Feldeffekttransistoren (ISFETs), einschließlich der zur Prozessierung notwendigen Materialparameter, so wie die Implementierung dieser optimierten Sensoren zur Detektion von Stichstoffmonoxid (NO), im Speziellen für biologische Anwendungen. Durch den angestrebten Einsatz der Transistoren in Flüssigkeiten werden an die chemische und mechanische Stabilität der Passivierung hohe Anforderungen gestellt. Im Vergleich mit den bekannten 'harten' Passivierungsmaterialien wie Si3N4 oder SiO2 konnte gezeigt werden, dass Polyimid die besten Isolationseigenschaften aufweist. Um Polyimid als Passivierung einzusetzen, musste aber ein neuartiger ECR (Electron Cyclotron Resonance) Plasmaprozess entwickelt werden, der einerseits die AlGaN/GaN-Elemente strukturiert und gleichzeitig den aktiven Sensorbereich schützt. Dabei handelt es sich um das sogenannte zweidimensionale Elektronengas (2DEG), das sich spontan zwischen der AlGaN- und GaN-Schicht ausbildet. Der ECR Plasmaschritt ermöglicht das notwendige anisotrope Ätzen zur Isolierung der ISFETs gegeneinander ohne eine messbare Degeneration des 2DEG. Dieser Prozess hinterlässt eine kontaminationsfreie Oberfläche und somit sofort messbare ISFETs, was vorher benötigte Reinigungsschritte überflüssig macht. Um die Detektion von NO zu erlauben, wurde eine Reihe neuer technologischer Prozesse entwickelt, wie etwa die entsprechende Gate-Funktionalisierung der AlGaN/GaN-ISFETs. Wolframtrioxid und Graphen stellten sich bei der vollständigen Analyse des Sensorverhaltens als die Besten der untersuchten Funktionalisierungen heraus. Beim Nachweis der NO-Sensitivität gegenüber bekannten störenden Substanzen, konnte über die Verringerung der pH-Sensitivität des funktionalisierten Transistors, eine gleichzeitige Messung des pH-Wertes und NO durchgeführt werden. Mit Hilfe von L929-Zellen (Maus-Fibroblasten) wurden darüber hinaus die ersten Tests zur Biokompatibilität des Systems durchgeführt. Um die Genauigkeit für in vitro Zellkulturen oder Gewebe-basierte Experimente zu erhöhen, wurde ein miniaturisiertes AlGaN/GaN-ISFET-Array entwickelt, mit einer Miniaturisierung und einem Pitch von 10 mm x 10 mm bzw. 100 mm x 100 mm. Mit einzelnen Sensoren wie auch den miniaturisierten Arrays kann eine Sensitivität von bis zu 57.0 mV/pH (nahe am theoretischen Nernst'schen Verhalten mit 58.2 mV/pH bei 20 ˚C) erreicht werden. Die Kombination von miniaturisierten Arrays und der Verringerung der pH-Sensitivität könnte in zukünftigen Arbeiten eine simultane NO- sowie pH-Messung auf einem Chip über einen lokalen Gradienten physiologischer Anwendungen ermöglichen.
http://nbn-resolving.de/urn:nbn:de:gbv:ilm1-2016000368
LTCC based multi-electrode arrays for in-vitro cell culture. - In: Additional conferences (Device packaging, HiTEC, HiTEN, & CICMT), ISSN 2380-4491, Bd. 2015 (2015), CICMT (Apr.), Seite 000269-000274
https://doi.org/10.4071/CICMT-THA12
Development of microstructuring technologies of polycarbonate for establishing advanced cell cultivation systems. - In: Handbook of polymers for pharmaceutical technologies, (2015), S. 67-93
https://doi.org/10.1002/9781119041412.ch3
LTCC-based multi-electrode arrays for 3D in vitro cell cultures. - In: Journal of ceramic science and technology, Bd. 6 (2015), 4, S. 315-324
https://doi.org/10.4416/JCST2015-00056
Spatiotemporal photopatterning on polycarbonate surface through visible light responsive polymer bound DASA compounds. - In: ACS Macro Letters, ISSN 2161-1653, Bd. 4 (2015), 11, S. 1273-1277
https://doi.org/10.1021/acsmacrolett.5b00653
Microfluidic 3D HepG2 cell culture: reproducing hepatic tumor gene and protein expression in in vitro scaffolds. - In: Engineering in life sciences, ISSN 1618-2863, Bd. 15 (2015), 3, S. 340-350
http://dx.doi.org/10.1002/elsc.201400083
Selective inhibition of HDAC8 decreases neuroblastoma growth in vitro and in vivo and enhances retinoic acid-mediated differentiation. - In: Cell death & disease, ISSN 2041-4889, Bd. 6 (2015), (19. Feb.), e1657, insges. 14 S.
http://dx.doi.org/10.1038/cddis.2015.24
Extended [pi]-conjugated system for fast-charge and -discharge sodium-ion batteries. - In: Journal of the American Chemical Society, ISSN 1520-5126, Bd. 137 (2015), 8, S. 3124-3130
https://doi.org/10.1021/jacs.5b00336
"From microtiter plates to droplets" tools for micro-fluidic droplet processing. - In: Microsystem technologies, ISSN 1432-1858, Bd. 21 (2015), 3, S. 539-548
http://dx.doi.org/10.1007/s00542-013-1981-y
Thermoforming techniques for manufacturing porous scaffolds for application in 3D cell cultivation. - In: Materials science & engineering, ISSN 1873-0191, Bd. 49 (2015), S. 509-516
http://dx.doi.org/10.1016/j.msec.2015.01.002
Direct extraction of carbonyl from waste polycarbonate with amines under environmentally friendly conditions: scope of waste polycarbonate as a carbonylating agent in organic synthesis. - In: RSC Advances, ISSN 2046-2069, Bd. 5 (2015), 5, S. 3454-3460
http://dx.doi.org/10.1039/C4RA14319A
New 3D-co-culture model and microbioreactor for lung exposure experiments. - In: Naunyn-Schmiedeberg's archives of pharmacology, ISSN 1432-1912, Bd. 387 (2014), S. S65
https://doi.org/10.1007/s00210-014-0960-x
Mikrobioreaktor und 3D-Lungenzellkulturmodell für Expositionsuntersuchungen mit Xenobiotika. - In: Technische Systeme für die Lebenswissenschaften, (2014), S. 197-202
3D multi electrode arrays. - In: MEA Meeting 2014, July 1-July 4, 2014, Reutlingen, Germany, (2014), S. 310-311
https://edocs.tib.eu/files/e01mr16/864386974.pdf
Body-on-a-chip: on-chip heart receiving metabolites from on-chip liver. - In: 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2013), (2014), S. 443-445
Nanostrukturierte SiO 2 -Gläser für die Mikrotechnik und Biosensorik. - Ilmenau : ISLE, 2014. - XV, 269 S. : Zugl.: Ilmenau, Techn. Univ., Diss., 2014
ISBN 978-3-938843-81-9
Die in dieser Arbeit untersuchte Einflußnahme auf die Eigenschaften additiver Sol-Gel-Membranen im TEOS-H2O-HCl-System sowie subtraktiv erzeugter Oberflächen auf Synthetic Fused Silica über die Synthese- bzw. Prozeßbedingungen, zielen auf eine innovative Funktionalisierung in der Sensorik zellanalytischer Systeme, sowie Material-hybrider MEMS. Die Charakterisierung erfolgt über Ellipsometrie, bildgebende Verfahren, stoffliche Analytik und impedometrische Methoden. Daneben wird die besondere Bedeutung einer gezielten Substratreinigung herausgestellt. Die angestrebte selbstorganisierte Porosität über die Si-O-Netzwerkbildung zum einen, und der selektive plasmachemische Abtrag zum anderen werden auf ihre Mechanismen untersucht. Erstere dient als siebend ionenselektive, langzeitstabile Membran auf dem open gate von pH-sensitiven, transparenten AlGaN/GaN-FETs in wässrigen Medien. Letztere begünstigt durch die Oberflächenvergrößerung in Kieselglas u.a. innovative Aufbau- und Verbindungstechnik. Zum einen werden an reproduzierbar erzeugten Sol-Gel-Schichten mit Dicken von 30 bis 380 nm, Brechungsindizes von 1,3 bis 1,9 als Indikator der Porosität und Rauheiten von 0,3 bis 30 nm Einflüsse auf die Schichtbildung untersucht und Rückschlüsse auf Porosität gezogen. Ausgewählte Sole wurden hinsichtlich ihrer Anwendung als ionenselektive Membran in MOS- und EIS-Strukturen untersucht, bevor sie auf AlGaN/GaN-Sensoren eingesetzt wurden. Auf Fused Silica erfolgte zum weiteren eine forcierte selbstorganisierte Nadelbildung über die gezielte Wahl der Prozeßparameter von DRIE-ICP- und RIE-Plasmaanlagen. Dabei können homogen stochastisch gras-, nadel-, säulen- oder röhrenartige Glas-Strukturen bis 1 nm Breite und 6 nm Länge bei einer Prozeßdauer von 90 min erzielt werden. Die Dichtevariation derselbigen reicht von 0,15 bis 90 106 mm-2. Kohlenstoffe sind zur Glas Gras-Bildung nicht notwendig, auch die Übertragbarkeit auf andere Siliziumoxide wird gezeigt. Rückschlüsse auf die Entstehungsmechanismen des Glas Grases werden gezogen, wobei Mikromaskierung durch Metalle, Verunreinigungen oder Polymerpassivierung eindeutig ausgeschlossen werden können. Innovative Anwendungen des Glas Grases sind die einfache, spannungsarme Verbindung mit Polymeren, Keramiken, sich selbst und Silizium über Black Silicon, sowie als Oberflächenvergrößerung in der Optik, elektronischen oder katalytischen Systemen.
Surface-enhanced Raman scattering (SERS) substrate based on large-area well-defined gold nanoparticle arrays with high SERS uniformity and stability. - In: ChemPlusChem, ISSN 2192-6506, Bd. 79 (2014), 11, S. 1622-1630
https://doi.org/10.1002/cplu.201402154
Integration of hydrogels into BioMEMS. - In: Shaping the future by engineering, (2014), insges. 9 S.
Die 3D-Zellkultur : ein Schutz für die Achillessehne der Wirkstoff-Forschung?. - In: GIT, ISSN 0016-3538, Bd. 58 (2014), 3, S. 76-78
ChemInform abstract: Direct access to 3-substituted 1,4-oxathiepino[5,6-b]pyridine-5-one through one-pot substitution cyclization reaction of 2-mercapto-3-nicotinic acid with [alpha]-bromo ketones. - In: ChemInform, ISSN 1522-2667, Bd. 45 (2014), 25, insges. 1 S.
http://dx.doi.org/10.1002/chin.201425191
Direct access to 3-substituted 1,4-oxathiepino[5,6-b]pyridine-5-one through one-pot substitution cyclization reaction of 2-mercapto-3-nicotinic acid with [alpha]-bromo ketones. - In: Tetrahedron letters, ISSN 1873-3581, Bd. 55 (2014), 2, S. 358-361
http://dx.doi.org/10.1016/j.tetlet.2013.11.030
Surface modified 3D polymer scaffolds and their influence on cell cultivation. - In: BioNanoMaterials, ISSN 2193-066X, Volume 14 (2013), issue supplement, P123, Seite 196
Poster Session: Beschichtungen und Grenzflächen (Strukturierung, Funktionalisierung, antibakterielle Eigenschaften, etc.)
https://doi.org/10.1515/bnm-2013-1016
Microstructured polymeric scaffold termed MatriGrid for 3D-co-cultures. - In: Naunyn-Schmiedeberg's archives of pharmacology, ISSN 1432-1912, Bd. 386 (2013), 1, S. S51
https://doi.org/10.1007/s00210-013-0832-9
Automatic multichannel analyzer for monitoring 3D-cultivated hepatocyte-derived albumin-levels. - In: Naunyn-Schmiedeberg's archives of pharmacology, ISSN 1432-1912, Bd. 386 (2013), 1, S. S45
https://doi.org/10.1007/s00210-013-0832-9
Modeling the formation process of grouping stimuli sets through cortical columns and microcircuits to feature neurons. - In: Computational intelligence and neuroscience, ISSN 1687-5273, (2013), Article ID 290358, insges. 10 S.
http://dx.doi.org/10.1155/2013/290358
3D engineered neural networks coupled to Micro-Electrode Arrays: development of an innovative in-vitro experimental model for neurophysiological studies. - In: 6th International IEEE/EMBS Conference on Neural Engineering (NER), 2013, ISBN 978-1-4673-1967-6, (2013), S. 957-960
http://dx.doi.org/10.1109/NER.2013.6696094
Neuronal cell spike sorting using signal features extracted by PARAFAC. - In: 6th International IEEE/EMBS Conference on Neural Engineering (NER), 2013, ISBN 978-1-4673-1967-6, (2013), S. 472-475
http://dx.doi.org/10.1109/NER.2013.6695974
Entwicklung eines integrierten multifunktionalen Fluoreszenzdetektors. - In: DGaO-Proceedings, ISSN 1614-8436, Bd. 114.2013, P47, insges. 2 S.
Fluoreszenzdetektion hat eine große Bedeutung in biologischen und medizinischen Anwendungen für die Analyse verschiedener Farbstoffe und Zellkulturen. Durch Kombination von Fluidik, Optik und Elektronik ist die Realisierung eines kompakten und hochempfindlichen Messsystems möglich, welches vorteilhaft bei der Messung von Proben mit kleinen Volumina ist.
http://www.db-thueringen.de/servlets/DocumentServlet?id=23544
In vitro cultivation of biopsy derived primary hepatocytes leads to a more metabolic genotype in perfused 3D scaffolds than static 3D cell culture. - In: RSC Advances, ISSN 2046-2069, Bd. 3 (2013), 37, S. 16558-16568
http://dx.doi.org/10.1039/C3RA42358A
Analysis and comparison of oxygen consumption of HepG2 cells in a monolayer and three-dimensional high density cell culture by use of a MatriGrid. - In: Biotechnology & bioengineering, ISSN 1097-0290, Bd. 110 (2013), 9, S. 2504-2512
http://dx.doi.org/10.1002/bit.24912
Multi-photon structuring of native polymers: a case study for structuring natural proteins. - In: Engineering in life sciences, ISSN 1618-2863, Bd. 13 (2013), 4, S. 368-375
http://dx.doi.org/10.1002/elsc.201200152
Robotic alliance of miniaturized synthesis and screening: a case study for the identification of histone deacetylase inhibitors. - In: Engineering in life sciences, ISSN 1618-2863, Bd. 13 (2013), 4, S. 344-351
http://dx.doi.org/10.1002/elsc.201200090
Mimicking the biological world: methods for the 3D structuring of artificial cellular environments. - In: Engineering in life sciences, ISSN 1618-2863, Bd. 13 (2013), 4, S. 352-367
http://dx.doi.org/10.1002/elsc.201200088
Synaptic behavior and STDP of asymmetric nanoscale memristors in biohybrid systems. - In: Nanoscale, ISSN 2040-3372, Bd. 5 (2013), 16, S. 7297-7303
https://doi.org/10.1039/C3NR01834B
The future of the patient-specific Body-on-a-chip. - In: Lab on a chip, ISSN 1473-0189, Bd. 13 (2013), 18, S. 3471-3480
https://doi.org/10.1039/C3LC50237F
The integrated micro optical sensor for photometry and fluorescence applications. - In: Smartsystems integration, (2013), insges. 8 S.
Impedance characterization of AlGaN/GaN Schottky diodes with metal contacts. - In: Applied physics letters, ISSN 1077-3118, Bd. 102 (2013), 14, S. 141607, insges. 4 S.
http://dx.doi.org/10.1063/1.4801643
3D polylactide scaffolds and polylactic -polycarbonate composite scaffolds manufactured through thermoforming for application in advanced cell culture. - In: BioNanoMaterials, ISSN 2193-066X, Volume 13 (2012), issue 1-4, V27, Seite 35
Session 3 - Tissue Engineering
https://doi.org/10.1515/bnm-2012-1005
3D capacitively coupled MEA on a 3D microstructure array with interface technology. - In: Conference proceedings of the 8th International Meeting on Substrate-Integrated Microelectrode Arrays, (2012), S. 297-298
'Drop-by-drop' - tools for droplet-based micro-fluidic processing. - In: Proceedings, (2012), insges. 9 S.
Capacitive sensor concept for monitoring neuronal activity in vitro. - In: Biomedical engineering, ISSN 1862-278X, Bd. 57.2012, Suppl. 1, Track-G, S. 1055-1058
https://doi.org/10.1515/bmt-2012-4074
Microstructuring of multiwell plates for three-dimensional cell culture applications by ultrasonic embossing. - In: Biomedical microdevices, ISSN 1572-8781, Bd. 14 (2012), 2, S. 291-301
http://dx.doi.org/10.1007/s10544-011-9605-8
Nerve cell response to inhibitors recorded with an aluminum-galliumnitride/galliumnitride field-effect transistor. - In: Journal of neuroscience methods, ISSN 1872-678X, Bd. 206 (2012), 2, S. 195-199
https://doi.org/10.1016/j.jneumeth.2012.02.018
ChemInform abstract: Convenient method for synthesis of thiazolo[3,2-a]pyrimidine derivatives in a one-pot procedure. - In: ChemInform, ISSN 1522-2667, Bd. 42 (2011), 44, insges. 1 S.
http://dx.doi.org/10.1002/chin.201144162
AlGaN/GaN sensors for direct monitoring of nerve cell response to inhibitors. - In: Semiconductor device-based sensors for gas, chemical, and biomedical applications, (2011), S. 1-42
The Eschenmoser coupling reaction under continuous-flow conditions. - In: Beilstein journal of organic chemistry, ISSN 1860-5397, Bd. 7 (2011), S. 1164-1172
http://dx.doi.org/10.3762/bjoc.7.135
Microbioreactor design for 3-D cell cultivation to create a pharmacological screening system. - In: Engineering in life sciences, ISSN 1618-2863, Bd. 11 (2011), 2, S. 133-139
http://dx.doi.org/10.1002/elsc.201000145
Mikropumpe für Mikrobioreaktoren. - In: Proceedings, (2011), S. 923-926
Mikro-Bioreaktorsystem zur 3D-Kultivierung mit polymeren Zellträgern. - In: Proceedings, (2011), S. 500-503
Angewandte Nano-Bio-Systeme mit mikrofluidischen und biosensorischen Elementen für die dreidimensionale Zellkultur :
Applied nano bio systems with microfluidics and biosensors for three-dimensional cell culture. - In: Materials science and engineering technology, ISSN 1521-4052, Bd. 42 (2011), 2, S. 139-146
http://dx.doi.org/10.1002/mawe.201100746
Convenient method for synthesis of thiazolo[3,2-a]pyrimidine derivatives in a one-pot procedure. - In: Tetrahedron letters, ISSN 1873-3581, Bd. 52 (2011), 29, S. 3814-3817
http://dx.doi.org/10.1016/j.tetlet.2011.05.067
Interaction of N-fluorescein-5-isothiocyanate pyrrolidine-C60 with a bimolecular lipid model membrane. - In: Materials science & engineering, ISSN 1873-0191, Bd. 31 (2011), 5, S. 1148-1150
http://dx.doi.org/10.1016/j.msec.2011.02.026
Untersuchung allgemeiner Kultivierungsparameter von HepG2 Zellen in polymerbasierten, mikrostrukturierten Tellträgern. - In: Biomaterialien, ISSN 2191-4672, Bd. 11 (2010), 1, S. 99
https://doi.org/10.1515/BIOMAT.2010.11.1.51
A family of new micro bioreactors for the 3D cultivation of liver cells. - In: Ukrainian-German Symposium on Physics and Chemistry of Nanostructures and on Nanobiotechnology, (2010), S. 89-90
P2.1.
AlGaN/GaN sensors for label free and non-destructive measurement of sodium ion fluxes of neuronal cells. - In: Ukrainian-German Symposium on Physics and Chemistry of Nanostructures and on Nanobiotechnology, (2010), S. 84
O2.8.
Applicated nanobiosystems with microfluidics and biosensors for three-dimensional cell culture. - In: Ukrainian-German Symposium on Physics and Chemistry of Nanostructures and on Nanobiotechnology, (2010), S. 77
O2.1.
Abschlussbericht zum Vorhaben: Mikrofluidik und Biosensorik : BioMePSens ; Laufzeit: 01.07.2005 - 30.06.2010. - Ilmenau : Techn. Univ., Zentrum für Innovationskompetenz MacroNano, Nachwuchsforschergruppe Mikrofluidik und Biosensorik, Fachgebiet NanoBioSystemtechnik. - Online-Ressource (PDF-Datei: 106 S., 3.544 KB)Förderkennzeichen BMBF 03ZIK0620
https://edocs.tib.eu/files/e01fb14/791382095.pdf