Structural and optical properties of C70 fullerenes in aqueous solution. - In: Fullerenes, nanotubes & carbon nanostructures, ISSN 1536-4046, Bd. 31 (2023), 10, S. 983-988
The simple method of preparation of highly stable and purified C70 fullerene aqueous solution (C70FAS) is proposed. The features of structural stabilization of C70 fullerenes in an aqueous solution by studying their structural and optical properties using Raman, photoluminescence, infrared reflection-absorption, UV-VIS absorption, and dynamic light scattering spectroscopy methods were analyzed. The experimental results showed that the most likely mechanism for C70 fullerenes stabilization in water is surface hydroxylation with covalent attachment of water hydroxyls to C70 fullerene carbons. Raman and infrared absorption spectra of C70FAS showed characteristic vibrational bands of C70 fullerenes with a slight broadening and low-frequency shift of ∼1 cm^−1, indicating the attachment of water hydroxyls to the C70 fullerene carbons. The photoluminescence spectra showed excitonic emission bands of C70 molecules with intensity depending on their content. UV-VIS absorption spectra demonstrate the absorption bands typical for monomeric C70 fullerene. Finally, the dynamic light scattering data confirmed that C70FAS is a typical colloidal fluid containing both individual C70 molecules and their nano aggregates up to 100 nm. These findings provide insights into the stabilization mechanism of C70 fullerenes in water and may have implications for their potential application in nanobiotechnology.
https://doi.org/10.1080/1536383X.2023.2229461
Improved peak-to-peak method for cavity length measurement of a Fabry-Perot etalon using a mode-locked femtosecond laser. - In: Optics express, ISSN 1094-4087, Bd. 31 (2023), 16, S. 25797-25814
Differing from the conventional peak-to-peak method using two neighboring spectral peaks in the frequency-domain fringe spectrum of the spectral response of a Fabry-Perot etalon to a femtosecond laser, which contains N spectral peaks equally spaced with a spacing of the etalon free spectral range (FSR), the proposed method employs a pair of spectral peaks with a spacing of an integer multiple k (k ≫ 1) of FSR for measurement of the etalon cavity length d with a reduced measurement error. Under the constrain of the total N spectral peaks obtainable in the finite spectral range of the femtosecond laser, the optimized k is identified to be N/2 in consideration of an averaging operation using N - k samples of d to achieve the minimum measurement error. The feasibility of the proposed method is demonstrated by experimental results with an uncertainty analysis based on "Guides to the Expression of Uncertainty in Measurement".
https://doi.org/10.1364/OE.493507
Scanning tunneling spectroscopy of lithium-decorated graphene. - In: Annalen der Physik, ISSN 1521-3889, Bd. 535 (2023), 11, 2300249, S. 1-8
Lithium decoration of graphene on SiC(0001) is achieved in a surface science approach by intercalation and adsorption of the alkali metal. Spectroscopy of the differential conductance with a scanning tunneling microscope at the Li-decorated graphene surfaces does not give rise to a pairing gap at the Fermi energy, which may be expected because of the previously predicted superconducting phase [Profeta et al., Nat. Phys. 2012, 8, 131]. Rather, pronounced gaps in the spectroscopic data of intercalated samples reflect the excitation of graphene phonons. Rationales that possibly explain this discrepancy between experimental findings and theoretical predictions are suggested.
https://doi.org/10.1002/andp.202300249
The 3D flower-like MnV12O31&hahog;10H2O as a high-capacity and long-lifespan cathode material for aqueous zinc-ion batteries. - In: Small structures, ISSN 2688-4062, Bd. 4 (2023), 11, 2300136, S. 1-11
Selecting the right cathode material is a key component to achieving high-energy and long-lifespan aqueous zinc-ion batteries (AZIBs); however, the development of cathode materials still faces serious challenges due to the high polarization of Zn2+. In this work, MnV12O31&hahog;10H2O (MnVO) synthesized via a one-step hydrothermal method is proposed as a promising cathode material for AZIBs. Because the stable layered structure and hieratical morphology of MnVO provide a large layer space for rapid ion transports, this material exhibits high specific capacity (433 mAh g−1 at 0.1 A g−1), an outstanding long-term cyclability (5000 cycles at a current density of 3 A g−1), and an excellent energy density (454.65 Wh kg−1). To illustrate the intercalation mechanism, ex situ X-Ray diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy are adopted, uncovering an H+/Zn2+ dual-cation co-intercalation processes. In addition, density-functional theory calculation analysis shows that MnVO has a delocalized electron cloud and the diffusion energy barrier of Zn2+ in MnVO is low, which promotes the Zn2+ transport and consequently improves the reversibility of the battery upon deep cycling. The key and enlightening insights are provided in the results for designing high-performance vanadium-oxide-based cathode materials for AZIBs.
https://doi.org/10.1002/sstr.202300136
Sex-related patterns in the electroencephalogram and their relevance in machine learning classifiers. - In: Human brain mapping, ISSN 1097-0193, Bd. 44 (2023), 14, S. 4848-4858
Deep learning is increasingly being proposed for detecting neurological and psychiatric diseases from electroencephalogram (EEG) data but the method is prone to inadvertently incorporate biases from training data and exploit illegitimate patterns. The recent demonstration that deep learning can detect the sex from EEG implies potential sex-related biases in deep learning-based disease detectors for the many diseases with unequal prevalence between males and females. In this work, we present the male- and female-typical patterns used by a convolutional neural network that detects the sex from clinical EEG (81% accuracy in a separate test set with 142 patients). We considered neural sources, anatomical differences, and non-neural artifacts as sources of differences in the EEG curves. Using EEGs from 1140 patients, we found electrocardiac artifacts to be leaking into the supposedly brain activity-based classifiers. Nevertheless, the sex remained detectable after rejecting heart-related and other artifacts. In the cleaned data, EEG topographies were critical to detect the sex, but waveforms and frequencies were not. None of the traditional frequency bands was particularly important for sex detection. We were able to determine the sex even from EEGs with shuffled time points and therewith completely destroyed waveforms. Researchers should consider neural and non-neural sources as potential origins of sex differences in their data, they should maintain best practices of artifact rejection, even when datasets are large, and they should test their classifiers for sex biases.
https://doi.org/10.1002/hbm.26417
Current to biomass: media optimization and strain selection from cathode-associated microbial communities in a two-chamber electro-cultivation reactor. - In: Environments, ISSN 2076-3298, Bd. 10 (2023), 6, 97, S. 1-19
Cathode-associated microbial communities (caMCs) are the functional key elements in the conversion of excess electrical energy into biomass. In this study, we investigated the development of electrochemical caMCs based on two-chamber microbial electrolytic cells (MECs) after optimization of media composition. Microbial communities obtained from a historical soil sample were inoculated into the cathode chamber of MECs. The inorganic medium with (A) carbon dioxide in air or (B) 100 mM sodium bicarbonate as carbon source was used in the absence of any organic carbon source. After 12 days of operation, the experimental results showed that (1) the bacterial community in group B exhibited lush growth and (2) a single strain TX168 Epilithonimonas bovis isolated from group A indicated electrochemical activity and synthesized large volumes of biomass using sodium bicarbonate. We also analyzed the caMCs of the MECs and reference samples without electro-cultivation using 16S rRNA gene sequencing. The results showed that the caMCs of MECs in groups A and B were dominated by the genera Acinetobacter and Pseudomonas. The caMCs were further inoculated and cultured on different agars to isolate specific electroactive bacterial strains. Overall, our study highlights the possibility of converting excess energy into biomass by electro-cultivation and the importance of selecting appropriate media to enrich specific microbial communities and single strains in MECs.
https://doi.org/10.3390/environments10060097
Binary fluids in mesoporous materials: phase separation studied by NMR relaxation and diffusion. - In: Magnetic resonance letters, ISSN 2772-5162, Bd. 3 (2023), 2, S. 108-117
Relaxation and diffusion measurements were carried out on single and binary liquids filling the pore space of controlled porous glass Vycor with an average pore size of about 4 nm. The dispersion of the longitudinal relaxation time T1 is discussed as a means to identify liquid-surface interaction based on existing models developed for metal-free glass surfaces. In addition, the change of T1 and T2 with respect to their bulk values is discussed, in particular T2 serves as a probe for the strength of molecular interactions. As the native glass surface is polar and contains a large amount of hydroxyl groups, a pronounced interaction of polar and protic adsorbate liquids is expected; however, the T1 dispersion, and the corresponding reduction of T2, are also observed for non-polar liquids such as alkanes and cyclohexane. Deuterated liquids are employed for simplifying data analysis in binary systems, but also for separating the respective contributions of intra- and intermolecular interactions to the overall relaxation rate. Despite the lack of paramagnetic impurities in the glass material, 1H and 2H relaxation dispersions of equivalent molecules are frequently found to differ from each other, suggesting intermolecular relaxation mechanisms for the 1H nuclei. The variation of the T1 dispersion when comparing single and binary systems gives clear evidence for the preferential adsorption of one of the two liquids, suggesting complete phase separation in several cases. Measurement of the apparent tortuosity by self-diffusion experiments supports the concept of a local variation of sample composition within the porespace.
https://doi.org/10.1016/j.mrl.2023.03.002
Ni/Al multilayer reactions on nanostructured silicon substrates. - In: Journal of materials science, ISSN 1573-4803, Bd. 58 (2023), 31, S. 12811-12826
Fast energy release, which is a fundamental property of reactive multilayer systems, can be used in a wide field of applications. For most applications, a self-propagating reaction and adhesion between the multilayers and substrate are necessary. In this work, a distinct approach for achieving self-propagating reactions and adhesion between deposited Ni/Al reactive multilayers and silicon substrate is demonstrated. The silicon surface consists of random structures, referred to as silicon grass, which were created by deep reactive ion etching. Using the etching process, structure units of heights between 8 and 13 µm and density between 0.5 and 3.5 structures per µm^2 were formed. Ni and Al layers were alternatingly deposited in the stoichiometric ratio of 1:1 using sputtering, to achieve a total thickness of 5 µm. The analysis of the reaction and phase transformation was done with high-speed camera, high-speed pyrometer, and X-ray diffractometer. Cross-sectional analysis showed that the multilayers grew only on top of the silicon grass in the form of inversed cones, which enabled adhesion between the silicon grass and the reacted multilayers. A self-propagating reaction on silicon grass was achieved, due to the thermally isolating air pockets present around these multilayer cones. The velocity and temperature of the reaction varied according to the structure morphology. The reaction parameters decreased with increasing height and decreasing density of the structures. To analyze the exact influence of the morphology, further investigations are needed.
https://doi.org/10.1007/s10853-023-08794-9
Multifunctional two-component in-situ hydrogel for esophageal submucosal dissection for mucosa uplift, postoperative wound closure and rapid healing. - In: Bioactive materials, ISSN 2452-199X, Bd. 27 (2023), S. 461-473
Endoscopic submucosal dissection (ESD) for gastrointestinal tumors and premalignant lesions needs submucosal fluid cushion (SFC) for mucosal uplift before dissection, and wound care including wound closure and rapid healing postoperatively. Current SFC materials as well as materials and/or methods for post-ESD wound care have single treatment effect and hold corresponding drawbacks, such as easy dispersion, short duration, weak hemostasis and insufficient repair function. Thus, designing materials that can serve as both SFC materials and wound care is highly desired, and remains a challenge. Herein, we report a two-component in-situ hydrogel prepared from maleimide-based oxidized sodium alginate and sulfhydryl carboxymethyl-chitosan, which gelated mainly based on "click" chemistry and Schiff base reaction. The hydrogels showed short gelation time, outstanding tissue adhesion, favorable hemostatic properties, and good biocompatibility. A rat subcutaneous ultrasound model confirmed the ability of suitable mucosal uplift height and durable maintenance time of AM solution. The in vivo/in vitro rabbit liver hemorrhage model demonstrated the effects of hydrogel in rapid hemostasis and prevention of delayed bleeding. The canine esophageal ESD model corroborated that the in-situ hydrogel provided good mucosal uplift and wound closure effects, and significantly accelerated wound healing with accelerating re-epithelization and ECM remodeling post-ESD. The two-component in-situ hydrogels exhibited great potential in gastrointestinal tract ESD.
https://doi.org/10.1016/j.bioactmat.2023.04.015
Glass-LTCC-interposer, a new plattform for HF-applications. - In: 2023 IMAPS Nordic Conference on Microelectronics Packaging (NordPac), (2023), S. 1-5
This publication introduces a new interposer made from a thin glass substrate and a multilayer LTCC compound. Combination of these two material classes into an interposer substrate enables the application of thin-film and thick-film technology in one substrate. In this study thin (100 - 200 μm) Borosilicate glass AF45® is applied. The glass substrate includes through glass vias, filled with Au-paste to provide the electrical connection from the glass surface to the underlying electrical structures on the LTCC uppermost layer. The multilayer LTCC green tapes DuPont™ 9K7 are prepared with ground structures on the uppermost layer. After the final lamination of the LTCC-multilayers to the glass, a sintering step causes the mechanical joint of the two materials as an interposer substrate. To demonstrate the Glass-LTCC-Interposer for HF-applications, microstrip line, coplanar waveguide and ring resonator were simulated, designed and fabricated. For the fabrication of fine lines and spaces, the semi-additive technology applying Auresinate paste in combination with Au-galvanic deposition was utilized. Finally, the realized structures were characterized up to 60 GHz. The HF-investigations of the realized structures on the glass-LTCC-interposer confirm the accuracy of this structuring method. Furthermore, these investigations approve the new interposer as a proper substrate for HF-applications.
https://doi.org/10.23919/NordPac58023.2023.10186223