Zeitschriftenaufsätze

Mit Hilfe von additiven Fertigungsverfahren lassen sich Kunststoffe mit unterschiedlichen Eigenschaften zu einem Produkt kombinieren. Dies erlaubt es, die Grundeinheiten von elektrischen Leiterplatten mittels Drucktechnik herzustellen, wobei der Aufwand weitgehend unabhängig von der hergestellten Stückzahl ist. Durch Drucken mit metallisierbaren Kunststoffen gelingt es, Leiterbahnen mit akzeptabler Leitfähigkeit auf elektrisch isolierendem Trägermaterial zu erzeugen. Die bisherigen Entwicklungen sind auf die Verwendung von Kunststoff mit einer maximalen Temperaturbelastung bis etwa 100 ˚C beschränkt. Um die bestehenden Verfahren der Leiterplattentechnik nutzen zu können, muss diese Temperaturobergrenze deutlich erhöht werden.

Generally, the pattern formed by individual particles trapped inside a microfluidic chamber by a two-dimensional standing acoustic wave field has been considered only the result of the acoustic radiation force. Previous studies showed that particles can be trapped at the local minima and maxima of the first-order pressure and velocity fields. Thus, either a rectangular or a diamond pattern can be formed solely depending on the particle size, when the acoustic field is unchanged, and the material properties of the particles and the fluid are fixed. In this paper, we report about the co-existence of different patterns with particles of the same size. The actual shape of the patterns depends mainly on the ratio between particle diameter and wavelength. In addition, particles were found to be trapped at locations that coincide with the position of antinodes, even though the particles have a positive acoustic contrast factor. These phenomena imply that the trapping of individual particles cannot be described by the acoustic radiation force solely. Hence, further research is required, taking the viscous drag force caused by the fluid flow induced by the acoustic streaming effect into account.

Focus-tunable lenses, e.g., liquid filled membrane lenses (MLs), have found increasingly widespread application in optical systems. If a large refractive power range is to be used, the correction of chromatic aberrations is particularly challenging: a group containing a single ML cannot be corrected over the whole refractive power range. In analogy to hybrid achromats for lenses with constant focal lengths, we present the combination of an ML and a diffractive Alvarez-Lohmann-lens (ALL) for the compensation of axial color over a large refractive power range. In contrast to the combination of multiple MLs, this does not increase the axial length of the system significantly. At the same time, the flexible adaption of the phase function of the diffractive ALL can reduce spherical aberration over the whole focal range. Design examples with ray-tracing and wave-optical simulations demonstrate the performance of the resulting hybrid tunable element. Experimental data from fabricated sample lenses provide a proof of principle.

Oxygen vacancies (OVs) have been reported to significantly alter the photocatalytic properties of BiOCl nanosheets. However, their formation mechanism and their role in the enhancement of photoelectrochemical performance remain unclear. In this work, thermally induced oxygen vacancies are introduced in BiOCl nanosheets by annealing in He atmosphere at various temperatures and their formation mechanism is investigated by in-situ diffuse reflectance infrared (DRIFTS) measurements. The influence of OVs on band offset, carrier concentrations and photoelectrochemical performance are systematically studied. The results show that (1) the surface of BiOCl nanosheets is extremely sensitive to temperature and defects are formed at temperatures as low as 200 ˚C in inert atmosphere. (2) The formation of surface and bulk OVs in BiOCl is identified by a combination of XPS, in-situ DRIFTS, and EPR experiments. (3) The photocurrent of BiOCl is limited by the concentration of charge carriers and shallow defect states induced by bulk oxygen vacancies, while the modulation of these parameters can effectively increase light absorption and carrier concentration leading to an enhancement of photoelectrochemical performance of BiOCl.

Since the turn of the millennium, the development and commercial availability of optical frequency combs has led to a steadily increase of worldwide installed frequency combs and a growing interest in using them for industrial-related metrology applications. Especially, GPS-referenced frequency combs often serve as a "self-calibrating" length standard for laser wavelength calibration in many national metrology institutes with uncertainties better than u = 1 × 10^-11. In this contribution, the application of a He-Ne laser source permanently disciplined to a GPS-referenced frequency comb for the interferometric measurements in a nanopositioning machine with a measuring volume of 200 mm × 200 mm × 25 mm (NPMM-200) is discussed. For this purpose, the frequency stability of the GPS-referenced comb is characterized by heterodyning with a diode laser referenced to an ultrastable cavity. Based on this comparison, an uncertainty of u = 9.2 × 10^-12 (τ = 8 s, k = 2) for the GPS-referenced comb has been obtained. By stabilizing a tunable He-Ne source to a single comb line, the long-term frequency stability of the comb is transferred onto our gas lasers increasing their long-term stability by three orders of magnitude. Second, short-term fluctuations-related length measurement errors were reduced to a value that falls below the nominal resolving capabilities of our interferometers (ΔL/L = 2.9 × 10^-11). Both measures make the influence of frequency distortions on the interferometric length measurement within the NPMM-200 negligible. Furthermore, this approach establishes a permanent link of interferometric length measurements to an atomic clock.