Zeitschriftenaufsätze und Buchbeiträge

Anzahl der Treffer: 1457
Erstellt: Wed, 17 Jul 2024 23:03:01 +0200 in 0.1255 sec


Halm, Cynthia; Otto, Andreas; Stark, Tilman; Schaaf, Peter
Ultrasonic excitation during press-fit joining of electrical contacts. - In: The international journal of advanced manufacturing technology, ISSN 1433-3015, Bd. 109 (2020), 7/8, S. 2215-2220

https://doi.org/10.1007/s00170-020-05760-6
Nilsen, Madeleine; Dannberg, Oliver; Fröhlich, Thomas; Strehle, Steffen
Direct polymer microcantilever fabrication from free-standing dry film photoresists. - In: Journal of micromechanics and microengineering, ISSN 1361-6439, Bd. 30 (2020), 9, 095012, S. 1-13

https://doi.org/10.1088/1361-6439/ab9e4c
Böttcher, René; Mai, Sebastian; Ispas, Adriana; Bund, Andreas
Aluminum deposition and dissolution in [EMIm]Cl-based ionic liquids-kinetics of charge-transfer and the rate-determining step. - In: Journal of the Electrochemical Society, ISSN 1945-7111, Volume 167 (2020), number 10, 102516, 8 Seiten

https://doi.org/10.1149/1945-7111/ab9c84
Vakaliuk, Oleksii; Werfel, Frank; Jaroszynski, Jan; Halbedel, Bernd
Trapped field potential of commercial Y-Ba-Cu-O bulk superconductors designed for applications. - In: Superconductor science and technology, ISSN 1361-6668, Bd. 33 (2020), 9, 095009, insges. 9 S.

Bulk high-temperature superconductors (HTSs) that act as a trap field magnet establish a novel type of magnetic field source, which is significantly different from that of a permanent magnet or solenoid; therefore, they can be potentially used in magnetic-force-based applications. However, the primary issues related to the commercial use of the bulk HTS technology are established on the enhancement of trapped magnetic fields, as well as their reliability and reproducibility at temperatures achievable with off-the-shelf cryocoolers. This study presents experimental investigations on the strong trapped magnetic fields observed in commercial Y-Ba-Cu-O bulk HTSs produced as a double-sample stack, a cylindrical bulk, and a ring-shaped bulk. Consequently, a reliable and reproducible magnetic field of 9.5 T at 50 K was trapped in commercial Y-Ba-Cu-O assembled as a double-sample stack. In this case, shrink-fit encapsulation with either aluminum or stainless steel tube ensured equally effective reinforcement. Higher magnetization, although accompanied with partial flux jumps, yielded a trapped field of 16.85 T at 30 K, which is comparable to the reported record trapped fields. Finally, a maximum trapped field of 9.78 T - the strongest trapped field reported to date - was attained in the 6 mm hollow space of the ring-shaped bulk HTS.



https://doi.org/10.1088/1361-6668/ab9fc4
Damanik, Ferdinandus Sarjanadi; Lange, Günther
Influence of MWCNT coated nickel on the foaming behavior of MWCNT coated nickel reinforced AlMg4Si8 foam by powder metallurgy process. - In: Metals, ISSN 2075-4701, Bd. 10 (2020), 7, 955, insges. 9 S.

This research studies the effect of multi-wall carbon nanotube (MWCNT) coated nickel to foaming time on the foam expansion and the distribution of pore sizes MWCNT reinforced AlMg4Si8 foam composite by powder metallurgy process. To control interface reactivity and wettability between MWCNT and the metal matrix, nickel coating is carried out on the MWCNT surface. Significantly, different foaming behavior of the MWCNT coated nickel reinforced AlMg4Si8 was studied with a foaming time variation of 8 and 9 min. Digital images generated by the imaging system are used with the MATLAB R2017a algorithm to determine the porosity of the surface and the pore area of aluminum foam efficiently. The results can have important implications for processing MWCNT coated nickel reinforced aluminum alloy composites.



https://doi.org/10.3390/met10070955
Wang, Hongmei; Xiong, Jie; Cheng, Xing; Chen, Ge; Kups, Thomas; Wang, Dong; Schaaf, Peter
Hydrogen-nitrogen plasma assisted synthesis of titanium dioxide with enhanced performance as anode for sodium ion batteries. - In: Scientific reports, ISSN 2045-2322, Bd. 10 (2020), 11817, S. 1-12

https://doi.org/10.1038/s41598-020-68838-x
Racko, Juraj; Lalinský, Tibor; Mikolášek, Miroslav; Benko, Peter; Thiele, Sebastian; Schwierz, Frank; Breza, Juraj
Vertical current transport processes in MOS-HEMT heterostructures. - In: Applied surface science, Bd. 527 (2020), 146605

https://doi.org/10.1016/j.apsusc.2020.146605
Hotovy, Ivan; Spieß, Lothar; Mikolasek, Miroslav; Kostic, Ivan; Romanus, Henry
Structural and morphological evaluation of layered WS2 thin films. - In: Vacuum, ISSN 0042-207X, Bd. 179 (2020), 109570
Im Titel ist "2" tiefgestellt

https://doi.org/10.1016/j.vacuum.2020.109570
Pezoldt, Jörg; Cimalla, Volker
Imprinting the polytype structure of silicon carbide by rapid thermal processing. - In: Crystals, ISSN 2073-4352, Bd. 10 (2020), 6, 523, insges. 21 S.

https://doi.org/10.3390/cryst10060523
Hiller, Daniel; Julin, Jaakko; Chnani, Ahmed; Strehle, Steffen
Silicon surface passivation by ALD-Ga2O3: thermal vs. plasma-enhanced atomic layer deposition. - In: IEEE journal of photovoltaics, ISSN 2156-3403, Bd. 10 (2020), 4, S. 959-968
Im Titel sind "2" und "3" tiefgestellt

https://doi.org/10.1109/JPHOTOV.2020.2989201