Approaching roll-to-roll fluidic self-assembly: relevant parameters, machine design, and applications. - In: Journal of microelectromechanical systems, ISSN 1941-0158, Bd. 24 (2015), 6, S. 1928-1937
https://doi.org/10.1109/JMEMS.2015.2452772
Large-area fabrication of TiN nanoantenna arrays for refractory plasmonics in the mid-infrared by femtosecond direct laser writing and interference lithography. - In: Optical materials express, ISSN 2159-3930, Bd. 5 (2015), 11, S. 2625-2633
https://doi.org/10.1364/OME.5.002625
High-performance forehearth coloring using Lorentz forces. - In: Heat processing, ISSN 1611-616X, (2015), 4, S. 85-89
In the production of coloring glasses molten white glass which flows out of the glass tank is colored in the melt zone of the forehearth by means of color concentrates (frits). It was observed that such frits tend to sink, degrading the glass coloring because the stirring battery needs a certain frits level to do a good homogenization, and contaminating the glass when they sediment. A suitable Lorentz force density distribution against the glass flow generated in the melt zone of the forehearth can be used to prevent the sinking process by a push-up effect and therefore to improve the input flow conditions of the stirring battery. On the basis of a verified numerical model which included the boundary conditions, process parameter and temperature depending material properties a suitable arrangement of electrodes, located in the molten glass, and coils, located in the insulation material of the forehearth are created and the effects of the generated Lorentz forces distribution on the temperature and velocity distribution are computed and discussed.
Das Fachgebiet Mikromechanische Systeme. - In: Jenaer Jahrbuch zur Technik- und Industriegeschichte, ISSN 2198-6746, Bd. 18 (2015), S. 319-331
Das Fachgebiet Metallische Werkstoffe und Verbundwerkstoffe. - In: Jenaer Jahrbuch zur Technik- und Industriegeschichte, ISSN 2198-6746, Bd. 18 (2015), S. 315-318
Das Fachgebiet Kunststofftechnik. - In: Jenaer Jahrbuch zur Technik- und Industriegeschichte, ISSN 2198-6746, Bd. 18 (2015), S. 261-269
Das Fachgebiet Anorganisch-nichtmetallische Werkstoffe. - In: Jenaer Jahrbuch zur Technik- und Industriegeschichte, ISSN 2198-6746, Bd. 18 (2015), S. 175-194
Design and characterization of a resonant triaxial microprobe. - In: Journal of micromechanics and microengineering, ISSN 1361-6439, Bd. 25 (2015), 12, 125011, insges. 9 S.
https://doi.org/10.1088/0960-1317/25/12/125011
Efficient direct solar-to-hydrogen conversion by in situ interface transformation of a tandem structure. - In: Nature Communications, ISSN 2041-1723, Bd. 6 (2015), 8286, S. 1-7
https://doi.org/10.1038/ncomms9286
Self-sufficient sensor for oxygen detection in packaging via radio-frequency identification. - In: Journal of sensors and sensor systems, ISSN 2194-878X, Bd. 4 (2015), 1, S. 179-186
http://dx.doi.org/10.5194/jsss-4-179-2015